Outdated WentWard Bus Type-D (Rear Engine) 7

...

 

Are you aware that the bus vibrates? Even with the engine off?

 

Why don't you help him fix it instead of nitpicking? Since you act like such a great modder and all round genius.

 

Do the headlights even work?

 

So I can't tell him that the bus has a bug? Am I supposed to fix it and tell him afterwards that it vibrates after a little bit of driving? Piss off.

And i'm waiting for another warning point as using Piss off is "innapropriate behavior".

 

ThreeDTech21 updated Blue Bird TC-2000 (Type-D) Rear Engine with a new update entry:

Patch Update

Read the rest of this update entry...

 

I found bug, which related with bus engine.

 

I'll be posting all skin designs to the overview page
so send some designs!​

Will be fixed in next update!
--- Post updated ---

Nice work! The skin system was recently fixed, glad to see some skins coming out! I will however be removing the blue bird logo from the side of the bus for the improved skin system update, check back soon

Edit: I noticed your skin has a shiny bottom part but the upper part and the roof is dull, To preserve the shine of the bus, delete any uneeded flat colors from your skins so that it wont overlay the shine

Announcement:
​

I have a few scenarios coming out for the bus, check back by the end of the week!

 

YEEEEAAAA finally got it working!

 

Nice work! The skin system was recently fixed, glad to see some skins coming out! I will however be removing the blue bird logo from the side of the bus for the improved skin system update, check back soon

Nice work! will be posted on the Overview page

 

Does the update stop the vibrating?

 

Not yet I still have to fine tune the jbeam settings and see if I can minimize the vibrations

 

The last thing to do is the front, I am pretty confused by the UV
for the front of the bus.

 

I did that on purpose to have a similarity to this

Also There is a problem with the light monitor inside the bus.

 

Hi, how do you get the skins? I dont have any option for the skins

 

I'll have to add some guideline lines to the bus so its easier to line up

Oh good job then! OK will be fixed in the next update
--- Post updated ---

Those skins haven't been officially released by the authors yet, whoever posted a skin design I just posted on the overview page

 

Nice work with the suspension. It feels much better than before. The bus seems to be little too heavy at 11500 kg when empty. I did some googling and found out that school buses of similar size weigh around 8500-8700 kg when empty. I made a new engine based on the 1997 190 hp Cummins 5.9 turbodiesel I6 like these Blue Birds have IRL and the Allison AT-545 4-speed automatic behind it with the 4.44 axle ratio. The bus is really sluggish with that engine. The 0-100 km/h acceleration takes about a minute and a top speed is around 105 km/h and every hill will put it onto it's knees. But it seems to be realistic. Lowering the weight to 8700 kg really makes the difference with this engine.

 

Didnt think of the weight ill have to adjust it to reflect real world weights, I did some googling to find the gross weight of a bus frame but couldnt find anything. I would like a 4 speed transmission for it but the ones I tried to make just didnt work right. If you have made one I will add it to the bus that would be excellent

 

I dont know what you mean.
I've been trying to do the same thing as the sides but
I cant color the bumper
EDIT : I mean area around lights.

 

You should be able to, the facsia is right under the front face of the bus, send me your texture