Thanks for your reply, dude. Oh I have one more thing. Can you add the Dual Arm Steering and Lifted Front Leaf Spring on all Front Axles (Single-Steer & Twin-Steer on AWD 1.0 & 2.0 ), please? Thank you.
epicfacecanada, tell me, the fact that there is no independent twinsteer interaxle tierod is done on purpose? I see isolation the required line, but steering mechanism looks strange. --- Post updated --- And V8 dasboard file has no some lines in nodes and beams groups, and this caused the steering shaft is missing, but flexbodies group contains unoriginal code. Is this done intentionally? I returned the file to its original context, and was able to restore the steering shaft.
Hi everyone, I have a problem. I have a Logitech G29 and H-shifter, and I'm using this mod. When I select the Road Ranger 18-speed option, gears 4 and 8 don't show up.
Hi, since the last BeamNG update the T-Series air suspension and lift axles don't work for me when the mod is active. The controls to increase or decrease airbag pressure don't respond and the lift axles don't work at all. It works fine without the mod active. I'm not sure if I'm doing something wrong or if the update broke something - are there any common player mistakes I can check for to make sure it's not me?
I've tried the common troubleshooting steps and lift axles work normally now, but I still can't get the airbag pressure to work. Without the mod installed it works normally. It's probably me doing something wrong - any advice?
There are a lot of coding changes in this 0.38 update. This mod may use different coding than the updated one, so some features may not work until the mod update is completed.
i feel like having the axles be able to be adjusted independently would be a good solution to having a steer axle that far back, i think one of the 6x6 d-series mods has this feature
New to the mod. Got a truck simulator shifter coming tomorrow but still having trouble I have no 4th or 8th gear. First position on my shifter is going into reverse, 2nd is low, 3rd is 1st and so on until I try to go into 4th it just goes to neutral. Go to high range and same all gears are there except 8th (6th on my shifter) goes back to neutral. 13 and the 18 speed so far are the same. Is there some type of key binding I need to do u haven't found anything on my issue. My shifter works fine and the key binding knows 6th gear exists so I'm not sure what I'm missing. Thanks
Its meant to be like that. It resembles the dog-leg shift pattern in a real 18/13 speed. Reverse is in the top left (where 1st is on a standard shifter), low gear is down from that then 1-4 is in a standard H pattern, flip to high range and go to where 1st was (3rd on your shifter) and thats 5th.
I understand but my issue is when I move the shifter from 3rd gear to what should be 4th it goes to neutral there is no gear. Flip range and when I go from 7th to 8th , 8th gear is missing it goes to neutral. I assumed I needed to configure something. But haven't found anything like this issue. When using the super 12 transmission for example, I can go from first to 6th then flip range and 7-12 no issues. 6th and 12th being the same shift location that's missing 4th and 8th on the 18 speed. I have the same issue with the 15 and 13 speeds. So not sure what's wrong, it's like each of those transmission mods are broken. I guess I could try to delete and re install the expansion mod
Yea i misinterpreted what you where saying in your first post. There shouldn't be any other configuration needed besides setting your splitter and range binds. Reinstalling the mod is worth a shot and if that doesn't work, try clear BeamNG's cache and disable any mods that could possibly interfere. Maybe try disable everything but the expansion mod and if it still does it, that eliminates the possibility of another mod interfering.
Gotcha ok appreciate the help. Sounds like it's the same process of repair as any other conflicting issues in beam and it's mods. I just hoped it was something simple like a bind. I believe I did try removing the few other mods I have, I didn't try un install and re install yet and clearing cache. Thanks If this works later when I try I'll just shoot an update.
Have u fixed this issue I have the same exact problem no 4th or 8th. Using Logitech 6 speed shifter. 13-15-18 speeds all the same, they just go into neutral.
I've went through testing this again and have unfortunately still been unable to replicate this issue on my end.
can you increase the length of the Pittman arm on the awd 2.0 twinsteer it makes the steering behave significantly better because it levels out the drag link so it doesn't try to push the axle down and it is also significantly longer on the md series awd axle anyway
Hi, I'm using a Cab-over day cab with AWD, airtanks and have put rear + rear rear airbags. For some reason I can't seem to manually change the height of the rear suspension. I'm thinking if I have missed something in the configuration, or if this is a bug? Thank you for creating this mod!
Also - when equipping the "High Volume air compressor", if I stall the engine, it won't start again until pressure is up at 9 bar (by just letting the ignition go continously while the pressure increases). Bug or something I've missed?
I can't seem to get the camper upfit to show on the MD series. I only have this mod enabled and it still wont show or load in when the config is selected. Is this a known issue that it wont load, and is there any way to fix it from not showing?
I am having the same issue with the suspension not airing up or down, neither are the tag axles, they stay the same psi no matter what key bind i set them to
I installed other "recommended" mods for the RLS Career, so I don't know which one solved it - but after that it started working for me. I installed like 70 of those mods though, so not sure which one it would be - just guessing it could be e.g. "Bella's Semi Add-on".
