WIP Beta released [OPEN FOR COLLAB] Ibishu Mirena (2000-2010) 2.1.0

Slab Bulkhead · Sep 30, 2026

Can the car get some race inspired liveries with stickers ?

Angry_Bird · Oct 6, 2026 at 10:44 PM

RASX Yuuka said: ↑

optitron instrument cluster for mirena
remilia itasha next day upload
--- Post updated ---

Similar to the Corolla Xrs
Click to expand...

RASX Yuuka said: ↑

release
cluster little bit edit (add fuel and water temperature light)
View attachment 1339475
Click to expand...

TYSM <3 Although I am quite busy and burnt out a bit from the 0.39 update.

RASX Yuuka · Oct 7, 2026 at 1:02 PM

Angry_Bird said: ↑

TYSM <3 Although I am quite busy and burnt out a bit from the 0.39 update.
Click to expand...

haha also (little bit buzy)

Zee0805 · Oct 9, 2026 at 5:14 PM

Blue Bird Gaming said: ↑

I don’t think the design is bad, I actually like how it looks but have to agree that it looks dated for supposedly being made until 2010. I suggest just shifting the model years to maybe ‘95/96 to 2005. Most of the interior can be backdated, maybe just an older looking option for the climate controls and say (in lore) that there was no touchscreen available before circa 2000 model year
Click to expand...

I have an idea for AngryBird.

What if we changed the current years of the current design to the years you suggested, and he can also model the design for an early 2010's car, based on the previously mentioned 2010+ Infinity g37? He would only change the body, and nothing else. That way, we kill two birds with one stone and satisfy both the sides who like the current design and those who think it should be redesigned.

This mod has real potential.

PS.(Sorry for asking a lot and ik you said you were burnt out)
--- Post updated ---

RASX Yuuka said: ↑

optitron instrument cluster for mirena
remilia itasha next day upload
--- Post updated ---

Similar to the Corolla Xrs
Click to expand...

Been a while since I played this mod, but it looks amazing.

Angry_Bird · Oct 9, 2026 at 10:34 PM

Zee0805 said: ↑

I have an idea for AngryBird.

What if we changed the current years of the current design to the years you suggested, and he can also model the design for an early 2010's car, based on the previously mentioned 2010+ Infinity g37? He would only change the body, and nothing else. That way, we kill two birds with one stone and satisfy both the sides who like the current design and those who think it should be redesigned.

This mod has real potential.

PS.(Sorry for asking a lot and ik you said you were burnt out)
--- Post updated ---

Been a while since I played this mod, but it looks amazing.
Click to expand...

Speaking of made to 2010, that would most likely the specialty V10 models, the production line for normal models (V6s and V8s) ended in the beginning of 2008 which aligns with the IRL Infiniti G Series. I should have added that so we don't have to make another model from the ground up, which I would also want the mod to be repo-friendly as well.

woro · Oct 9, 2026 at 11:03 PM

woro said: ↑

is the mirena meant to have messed up textures? the trim isn't supposed to be yellow and the paint is too dark
View attachment 1339124
Click to expand...

coming back to this, i do have stuff like the european pessima but idk what may cause the conflict
i do have the current version of the mod as seen by the marker lights on the fenders

Zee0805 · Oct 9, 2026 at 11:24 PM

Angry_Bird said: ↑

Speaking of made to 2010, that would most likely the specialty V10 models, the production line for normal models (V6s and V8s) ended in the beginning of 2008 which aligns with the IRL Infiniti G Series. I should have added that so we don't have to make another model from the ground up, which I would also want the mod to be repo-friendly as well.
Click to expand...

I'm not saying make it a 1:1 Infiniti G series. I'm just saying it can be a model that takes elements from premium Japanese sedans from early 2010/late 2000s, and you also keep the current design of the Mirena. Also I dont mean start from scratch on making the model, I mean like, making the body a bit curvier and editing the current proportions to look like said car.

destroyeer6511 · Oct 10, 2026 at 1:18 AM

Angry_Bird said: ↑

Ibishu Mirena (2000-2010)

Pronunciation: / mi-rii-na /

Naming: The Mirena is purposefully similar yet different from the Ibishu Miramar (that @Nacho Problem is working on so I would let her do the thing when she is far more skilled than me). Its naming is inspired by the real-life Maxima too (explains that it has only 6 letters instead of 7).

Inspirations: Nissan Maxima (for being based on the Pessima which is the BeamNG equivalent of the Nissan Altima), Infiniti M for the longitudinal engine layout

Lore: Ibishu wants to export LHD markets (mainly the North American, Middle Eastern, and less commonly European markets) with a newer luxury vehicle that is DIFFERENT yet having some semblances the Miramar as well as the Pessima. The Mirena being a longitudinally mounted vehicle, fits perfectly in between the two. If you do manage to spot some ETK-based parts for the interior, that is because there is some assistance from ETK for the Ibishu to develop a highly-advanced modern sports sedan. Production ceased at beginning of 2008 but some specialty V10 models production persisted to until 2010.

Body, exterior and interior in general (DONE):

Based upon the EUDM Pessima by @ibishucovet1987.txt (APPROVED by author in dev screens)

View attachment 1094980

Engines (DONE):

3.5L V6 (Based on the Nissan VQ35 obviously, NA SC and TT) (DONE)

View attachment 1094982

3.0L V6 TT (Based on the Nissan VQ30DETT, Race only, Twin Turbo only, ~500 HP, same model as the 3.5L V6) (DONE)

5.0L V8 (Based on the Nissan VK50, NA SC and TT, Will be included in the initial release) (DONE)

4.0L DTM V8 (NA only, Will be included in the initial release) (DONE)

5.0L V10 (NA only, based on the Lamborghini Gallardo V10 engine, will be included in the initial release) (DONE)

Drivetrain (DONE):

RWD (Pessima driveshaft + Diff + Halfshafts)

AWD (Pessima driveshaft + Diff + Halfshafts, Scintilla driveshafts + Differentials)

Fuel Tank (DONE): 4 fuel tanks

View attachment 1094983

Exhaust (DONE): Standard Dual Muffler (dual tips on each side just like the 6th gen Maxima), GTz Dual Muffler (centerized muffler, dual tips on each side), Race Duals muffler-removed (Single tip on each side) Uses one muffler on each side, quad tips in total for all exhausts

View attachment 1094981

Interior (DONE): Retains models with the EUDM, but interior skins will be outsourced (Black, Beige, Gray Leather instead of Pessima’s cloth), cream and black/red (see latest post)

Gauges (DONE) (edit: both V6 and V8 will use the same version to reduce workload except GTz): 7000 RPM redline, 8000 RPM maximum shown for tachometer (same as the stock gauges), 280 km/h or 175 MPH shown for speedometer, everything else reuses from the Pessima

GTz variants (V6 and V8) will have a higher maximum shown for speedometer, being 330 km/h or 210 MPH, with tachometer being 10000 RPM max displayed, 8000 RPM redline (Note the needles will remain the same except for the wheelspeed and tachometer's multiplier)

Racing digital dash will be available as well, will use generic racing dashboard.

Interior navigation screen (DONE): Will be mounted in the central cluster (replacing the radio), SE-related trims along with racing configs will not have interior navigation screen.

Bumpers (DONE):

Front bumper uses Facelift standard as basis, separated objects with sport and race.

Rear bumpers will remain as one piece (Sport, Race, Custom, extended race bumper)

Lettering:

View attachment 1094984

RHD (DONE): Maybe 1st update after initial release, possibly rebadged. Will be in initial release.

Shifter base (DONE):

Manual uses stock Ibishu meshes but the stick surface uses ETK

Automatic will use both Ibishu meshes and ETK meshes (separate objects)

Trims (non-specified are 6M/7A by default) (influenced by Nissan Maxima and Infiniti) (anything with "X" is available with AWD):

3.5 Sport Enthusiast (X is optional), 300 hp(Police variant is only available as "Sport Enthusiast X" for 3.5s, to overall balance between cost and utility) (~162 MPH) (Manual or automatic)

3.5 Sport Luxury, 325 hp (X is mandatory) (~162 MPH) (Automatic only)

3.5 GranTurismo Sport, 330 hp (X is optional) (~170 MPH) (Manual or automatic)

3.5 GranTurismoZ, 400 hp (Pre 2004 NA), 550 hp (Post 2004 Twin Turbo) (X is mandatory) (~180 MPH, ~205 MPH) (Manual or automatic)

5.0 GranTurismo, 450 hp (X is optional) (~186 MPH) (Manual or automatic)

5.0 GranTurismoZ, 600 hp (RWD only) (~205 MPH) (Manual or automatic)

4.0 V8 DTM Race (~500 HP, ~190 MPH) (6SQ only) (RWD only)

5.0 GT2 (~600 hp, 200+ MPH) (6SQ only) (RWD only)

1 Aftermarket configuration for ProCharged Centrifugal Supercharger 3.5 V6 (600 hp, 200 MPH) (RWD only and manual only)

2 Chinese configurations, one 3.5 Sport Luxury-based and another 5.0 GranTurismo-based (with different ECU for supercharger, 500-600 hp) (Yes they use Jinhai badge in the grille and custom Chinese character lettering in the rear) (X is mandatory) (Automatic only)

1 Limited V10 configuration (550 hp, 200+ MPH, AWD and DCT only)

1 Custom 3.5 Twin Turbo Top Speed configuration (1600 hp, 280+ MPH, AWD and sequential)

Police parts: Will ask help for the spotlight and partition, as well as other police parts from the Bastion, will likely not be in initial release.

Skins: Uses same UV map as the EUDM Pessima, TBD (will ask someone that is/are willing to design skins)

Tire Size (DONE): Will use 245/40R18s front and rears for standard configurations as 3.5 SE, SL and GTS. 245/35R19 fronts and 265/35R19 rears will be used for 5.0 GT configurations. 245/35R19 fronts and 295/30R19 rears will be used for GTz-configurations. DTM and GT2 will use customized widened tire size.

Wheels (DONE): A couple Ibishu wheels + some ETK-based wheels and Hirochi SunSport S-based wheel, GTz (TT only) will have ETK ttSport-based 19 inchers.
Size 18x9 (all other non GTz 3.5 configs), 19x9 and 19x10 (5.0 GT), 19x9 and 19x11 (GTz only)

Cargo Load (DONE): Yes for rear seats and trunk as well.

Q: What things are done?
A: V6 engine model (NA and TT, except for joining some separated parts), Front Mirena bumper (facelifted upper, sport and race under), Rear Mirena bumpers (accommodates quad-exhaust), Exhausts (not joined yet)
Interior skin in general (Black, Gray, Beige LEATHER), Gauges

Q:What things need to work on and need help?
A: Engine tuning, wheels, configs, rear suspension jbeam (adding upperarm to midsize_suspension_R.jbeam) . Most of them are done (reusing the original midsize rear suspension jbeam for now, model is done), lettering could borrow some help for upgrading to b, nm, o and r maps from d, n and s maps (alternate approach to lettering is helped by @Bentonchiez )

Q: RHD?????
A: Not the initial release lol, will be released in the 1st update that is POST initial release
NVM RHD will be finished too and will be released in the initial release

Q: But wait, you haven't shown us the superchargers and V8s!!!!
A: Yes they WILL be done, since I am split on using a centrifugal or a roots supercharger (if I am using centrifugal supercharger then it will take A LOT longer time though since I have no experience with centrifugal superchargers!, I might try to ask @JΛVI if I am allowed to use some assets from the Classic Engine Expansion Pack), Supercharger is done btw

Potential bugs:
- Hood is twitching hard Fixed in updates
- One bit of the rear quarterpanel does not work well for skins (mainly due to Pessima and EUDM Pessima having different UVmaps) but they are relatively minor (Will get an UV during the learnings of the Sunstorm update)
- Rare but when driven extremely hard and crashing, the left exhaust might break off the car

Note this is my first (serious) vehicle mod that will be having its own vehicle slot, so please do not be too criticizing.

Credits:
Me: Engine model and JBeam, Drivetrain model and JBeam, Gauges, Spoiler model and everything else
@ibishucovet1987.txt : Generously allowing me to utilize his EUDM Pessima's body and most other exterior parts
@JustRobertOFF : Generously allowing me to utilize his Pescoupe's alternate taillights and the JinHai brand for the Chinese configs
@BrynCoops : Developing interior skins
@Derpitron and @IcedRoad : Teaching me how to make analog gauges base maps and getting the glow map working
@JΛVI : Centrifugal Supercharger model
@Dennis-W : Advice on multilink rear suspension 3D model
@Bentonchiez : Teaching me how to make extruding lettering models
@Born 2 Drive : V6 engine sounds (initial release)
@jojos38 : V10 startup sound
@BeamNG : Vanilla assets to make this mod go well!
@YSparkle : Info config guides on Chinese configs
@Inn0centJok3r : Letting me to use her brake glow mod (for the next update)
Click to expand...

i have absolutely no idea why

Forums

Mods

WIP Beta released [OPEN FOR COLLAB] Ibishu Mirena (2000-2010) 2.1.0

Slab Bulkhead
Expand Collapse

Angry_Bird
Expand Collapse

RASX Yuuka
Expand Collapse

Zee0805
Expand Collapse

Angry_Bird
Expand Collapse

woro
Expand Collapse

Zee0805
Expand Collapse

destroyeer6511
Expand Collapse

Useful Searches

WIP Beta released [OPEN FOR COLLAB] Ibishu Mirena (2000-2010) 2.1.0

Slab Bulkhead Expand Collapse

Angry_Bird Expand Collapse

RASX Yuuka Expand Collapse

Zee0805 Expand Collapse

Angry_Bird Expand Collapse

woro Expand Collapse

Zee0805 Expand Collapse

destroyeer6511 Expand Collapse

Slab Bulkhead
Expand Collapse

Angry_Bird
Expand Collapse

RASX Yuuka
Expand Collapse

Zee0805
Expand Collapse

Angry_Bird
Expand Collapse

woro
Expand Collapse

Zee0805
Expand Collapse

destroyeer6511
Expand Collapse