Released Ibishu Covet BTX

Discussion in 'Mods and Skins' started by Atomix, Sep 28, 2015.

  1. Atomix

    Atomix
    Expand Collapse

    Joined:
    Dec 15, 2012
    Messages:
    1,343
    This is a Honda CRX-esque body for the covet, I tried to keep it as simple as possible, so no new stuff that would require the presence of materials.cs
    I did try to make it a mod compatible with AR16B's 5door covet mod, really I did, but I couldn't get it to work properly, and I really can't be bothered anymore.
    It doesn't even zip like a proper mod, have no clue why it won't work zipped, don't care atm.
    Maybe later i will fuse this with my 4x4 covet mod and make it all standalone but right now this is all.

    screenshot_00163.png

    Gabester- original Covet
    AR16B- body hierarchy from his 5door covet mod
    Atomix- customizing it, etc.
    SkinRocks- helping fix it.

    INSTALL:
    unzip it so that the final path is BeamNG.drive/mods/vehicles/hatch/<files>

    I know, it is not supposed to be done that way but i couldn't work it out properly right now.
     

    Attached Files:

    #1 Atomix, Sep 28, 2015
    Last edited: Oct 13, 2015
    • Like Like x 2
  2. AR162B

    AR162B
    Expand Collapse

    Joined:
    Aug 11, 2013
    Messages:
    815
    if you add a vehicles folder inside the zip (covet_btx.zip/vehicles/hatch/files) it should work fine. I tried, it's in-game but somehow the suspension collapses. But that can be my fault as I am messing around with the 5-door mod. (although I didn't alter the suspension parts)
    For the 4x4 mod; if you add a an uniquely named folder inside the hatch folder, you can add a materials file inside this folder containing only the added materials. This way it won't conflict with original content and/or other mods :)

    As I'm updating the 5-door mod atm, if you wish I can add some slots to the body jbeam so a future 4x4 mod and my 5-door mod can be compatible with each other.
     
  3. Atomix

    Atomix
    Expand Collapse

    Joined:
    Dec 15, 2012
    Messages:
    1,343
    I did try that, but when i do that and don't touch the files anyhow else the original 3door body is not there, not selectable, so if you spawn one in the original config it goes to 0; 0; 0 on the map and spawns that untextured license plate like it always does, works if the btx body is selected.

    I have no clue why it does that to me, i've packed and repacked it a bunch of times, put it in mods and it does this and just this. I gave up after that and released it like this.

    a 4x4 slot would be nice, tho
     
  4. Dr3w1248

    Dr3w1248
    Expand Collapse

    Joined:
    May 15, 2015
    Messages:
    159
    Does the BTX have the custom hubcaps that I've seen on it a while ago?
     
  5. Atomix

    Atomix
    Expand Collapse

    Joined:
    Dec 15, 2012
    Messages:
    1,343
    Nope, those were actual Honda CRX wheels from Forza.

    not included, neither is the popup lights frontclip.
     
  6. direct_UA

    direct_UA
    Expand Collapse

    Joined:
    Jun 20, 2014
    Messages:
    769
    I have problem with rear suspension; it breaks when car spawns. I have deleted other hatch-related mods, still got this problem.
    screenshot_00610.jpg
     
  7. Atomix

    Atomix
    Expand Collapse

    Joined:
    Dec 15, 2012
    Messages:
    1,343
    Oh snap.
    I did forget about that.

    the main jbeam of the btx is based on a older covet jbeam, so it got broken through the updates.
    I am still on 0.4.0.6 and i based this on the covet from that version, and that is uncompatible with the latest hatch version.

    I suppose i could add my suspension into the pack, but it might handle worse because it was not meant for that version.

    EDIT: alright, updated and added a spare rear suspension for the BTX to use, see if that is any help.
     
    #7 Atomix, Sep 28, 2015
    Last edited: Sep 28, 2015
  8. direct_UA

    direct_UA
    Expand Collapse

    Joined:
    Jun 20, 2014
    Messages:
    769
    I still have breaking suspension... Deleted cache, still not working
    screenshot_00611.jpg
     
  9. Atomix

    Atomix
    Expand Collapse

    Joined:
    Dec 15, 2012
    Messages:
    1,343
    welp, the problem is clear and there is not much i can do about it. It will work for whoever will have a older version, like the 0.4.0.6

    [On Hold] until i will be able to run a more recent version
     
  10. direct_UA

    direct_UA
    Expand Collapse

    Joined:
    Jun 20, 2014
    Messages:
    769
    Sad... Good luck then!
     
  11. Brett

    Brett
    Expand Collapse

    Joined:
    Jul 27, 2013
    Messages:
    269
    Just take the rear suspension out of the Covet from the latest version of BeamNG.
     
  12. direct_UA

    direct_UA
    Expand Collapse

    Joined:
    Jun 20, 2014
    Messages:
    769
    I think it not just that simple...
     
  13. Dummiesman

    Dummiesman
    Expand Collapse

    Joined:
    Sep 17, 2013
    Messages:
    4,583
    Should be. I don't think this mod modifies the chassis in any way.
     
  14. Atomix

    Atomix
    Expand Collapse

    Joined:
    Dec 15, 2012
    Messages:
    1,343
    Should be, but isn't. I did really try.
     
  15. ShinRocks

    ShinRocks
    Expand Collapse

    Joined:
    Feb 26, 2015
    Messages:
    30
    Downloaded Version 1.1,

    hatch_btx.jbeam, line 33, running gear has ["hatch_suspension_R","hatch_suspension_R", "Ibishu Covet Rear Suspension"],
    changed to ["hatch_suspension_R_btx","hatch_suspension_R_btx", "Ibishu Covet Rear Suspension"]
    seems to work now.

    "hatch_wheel_R_sport_btx" Flexbody is missing "hatch_crxwheel"
    swapped it back to stock hatch sport rims
    updated "btx_sport.pc" files to load the correct parts.

    It's working on my version 4.2.2 with no other hatch modes installed at all.

    https://www.dropbox.com/s/kk9y7h7qzeaovqz/hatch(shin).rar?dl=0

    Edit: wont let me upload a zip directly so adding link to dropbox
     

    Attached Files:

    • Like Like x 2
  16. NismoR35

    NismoR35
    Expand Collapse

    Joined:
    Aug 2, 2013
    Messages:
    471
    Shin's fix works fine with AR162B's 5 door mod as well.

    Edit: Eh, rear hubcaps are missing now.
     
    #16 NismoR35, Oct 13, 2015
    Last edited: Oct 13, 2015
  17. Atomix

    Atomix
    Expand Collapse

    Joined:
    Dec 15, 2012
    Messages:
    1,343
    Alright, if you say it works, okay.
    Zipped it with ShinRocks' fixed files (+added in op credits) and changed thread prefix. as 1.3
     
    • Like Like x 2
  18. YortstarGaming

    YortstarGaming
    Expand Collapse

    Joined:
    May 19, 2015
    Messages:
    446
    excuse my dumbness, but what file is the latest??
     
  19. machine

    machine
    Expand Collapse

    Joined:
    Feb 26, 2013
    Messages:
    705
    The 1.3
     
    • Like Like x 1
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice