Automation Car Design Challenge!

I used the C25 and the stats can be seen a bit higher up the page...
--- Post updated ---

Hope you can get to it as fast as possible.Also It looks like it's going to be Hot-hatch next!So better get going and I am also going to make one.

 

guys?anyone here?

 

When is the pool deadline

 

like today I guess is OK?AAANNND looks like it's going to be hot-hatch next!
--- Post updated ---
Requirements:2.0l if N/A and 1.5l if turbo,DOHC 16v VVL and VVT 7000rpm max,EFI,MUST run on regular gasoline,standard intake,MUST be I4,atleast 34mpg (6.9 l/100km),FWD any front diff,6 speed manual OR 5 speed auto,16 or 17 inch rims,sports compound or medium compound,regular 10s or advanced 10s safety,$30,500 maximum.TWO cars max.Also nothing over 295hp.

 

more like an regular hatch actualy
and please remove the rpm limit, in 7000rpm a 2l i4 EFI standard intake just capable around -170hps not very badass,but and please allow RWD(i hate sporting fwd cars honestly besides integras,focuses,civics,and fiestas)
and think of ford focus st ,a cheap sporting hatch has 247hp with turbo 2litre engine
but 1.5 is very chalenging =D

 

ok no rpm limit any intake BUT you must have have AWD (it can be rear biased)

 

15/85 XD has rwd traits but also have advantage of spinning front wheel = less spin,less oversteer
so it must be AWD 0/100? not true RWD? nor 15/85 okay DEAL!
my next car will has 'magical' rpm

 

I mean the most I would allow would be 75/25 but respond if you think it should be more rear biased

 

full RWD(pls allow 0/100), AWD 75/25 and FWD (+5scroe if survived the abuse of understeer)

 

I mean what is the point of AWD when you are going to have it as RWD,NO OTHER HATCH IS RWD lol
But ok...
--- Post updated ---
https://www.beamng.com/resources/recanna-trisa-gti.7705/
Recanna Trisa GTI 1.5l DOHC 16valve Turbo 35.5mpg FWD 215mm tires all arround Manual 5 speed Electric front diff

 

okay i understand 0/100 awd is it? or i must have 75/25?
honestly i dont like the face of the trisa, hard to explain

 

https://www.beamng.com/resources/recanna-trisa-gti.7705/
Recanna Trisa GTI 1.5l DOHC 16valve Turbo 35.5mpg FWD 215mm tires all arrou

I would prefer 75/25 for just the sake of the comp and IK that the trisa is a bit ugly I just made a prototype it isnt the final version
--- Post updated ---
Okay so the engine limitations are no longer true because I've just noticed that they are really unrealistic.anything up to 3.0l I4 Turbo can be added
--- Post updated ---
Okay so I'm making an RS version with about 270hp and torque vectoring AWD.

 

Final ST version of the Trisa the ST is replacing the GTI (still working on the RS version):2.0l turbo I4 DOHC MEFI 16valve 40mpg 233hp $27830 17 inch rims
https://www.beamng.com/resources/recanna-trisa-st.7713/
LOOKIN' GOOD!

 

ok, I'll do a less powerful variant of the C-Morran. So the variant I think will be MCN.

 

I...what is the displacement of the C-Morran?

 

That is, sorry but the translator is not the best

 

I mean how much liters does the C-Morran engine have?

 

I created it for the challenge.

 

I mean the engine how big is it?

 

I stick to the statistics you asked for (I have yet to create)