OP Driveshaft and Half-Shaft For Every Vehicle 2.2

We have received a new car in this update, a limousine for the first time so this update includes the OP Driveshaft for it

And about the MD-Series, I once again looked into the JBEAM file of that vehicle and tried tweaking around with the beam strength value but despite changing it, increasing it or changing the "FLT_MAX" setting, I couldn't increase its strength, this may be related to the issue I mentioned in the 2.0 update where other parts of the vehicle cause the driveshaft to...

We got a remaster for the Hirochi Sunburst, therefore this update includes the OP Driveshaft and Half-Shafts for it

I noticed that the EV version of both the Vivace Cherrier FCV and Hirochi SBR4 didn't have OP Halfshafts, so this update now includes them.

After receiving feedback mentioning that the OP Driveshafts were not strong enough, I decided to test it out myself.

I used a T Series drag modification, which produces around 9000 lb-ft torque and nearly 15,400 hp, and increased the beam strength of the Rear Driveshaft to around '999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999'.

After fully pressing on the gas pedal, the Driveshaft would almost instantly snap, I even tried using...

So we got a new vehicle, the Bruckell Nine, which means this mod has been updated to now include the OP Driveshaft for it , btw I've seen my mod being reposted on other websites, at least give me credits for it

BeamNG has been updated, which now includes the new Gavril MD-Series and new variants of the T-Series, therefore this mod update includes the OP Driveshaft for both of them

This update includes the remake of the OP Driveshaft and Half-Shaft for the new remastered Ibishu 200BX, which is now called the BX-Series

This update includes a remake of the T-Series driveshaft mod which now includes the OP Driveshaft for the new Festive Freight

So we got a new update, now v0.30, which includes a new UTV vehicle, the Hirochi Aurata, therefore this update includes the OP Driveshaft and Half-Shaft for it

I noticed that the SP RockBasher wasn't able to add the OP Rear Driveshaft, it would automatically change back to the stock one, so what i had to do is modify all 4 Front Suspension Frames for the RockBasher, this means that you will have to change the frame to one of the OP ones and then change the Rear Driveshaft in the Rear Suspension list