Beta ETK800-pro 1.1

Hello everyone!

I am publishing hot-fix update for this repo. Thanks to the wonderful feedback, I was able to correct my mistakes.

​

---

Hot fix v1.1:

• fixed suspension textures - now even if you don't have sunburst-pro installed, the textures will display properly;
• fixed issues with the pro configuration config (they are now as I originally intended);
• fixed jbeam for the i6 (now fully supports high engine RPMs), and added a high-RPM ECU for the v8;
• fixed front suspension spring geometry - rewrote jbeam for more accurate strut simulation.

Many thanks for this fix:

• KenKen911 (https://www.beamng.com/members/kenken911.275687/) - for the excellent explanation about engines' RPMs (a full update for the v8 and i6 will be in the next update).
• DANTHEDRIFTER55 (https://www.beamng.com/members/danthedrifter55.554691/) - for providing screenshots with bugs and error logs that occurred with version 1.0
• ManjiMessiah (https://www.beamng.com/members/manjimessiah.694170/) - for detailed suggestions on the front suspension (a suspension update will be in the next update)