The Physics in BeamNG.Drive make me lag, what hardware upgrade would fix that??

Discussion in 'Computer Hardware' started by Glitchy, Feb 17, 2017.

  1. Glitchy

    Glitchy
    Expand Collapse

    Joined:
    May 26, 2015
    Messages:
    832
    I need help..
     
  2. waffles245

    waffles245
    Expand Collapse

    Joined:
    Jun 18, 2016
    Messages:
    9
    1. lower your graphics settings to lowest, and see if that changes anything
    2. if not, consider buying a better gpu and adding more ram. around 16 gb is where you'll want to be
    3. a high end intel core i7 will also help
     
  3. Glitchy

    Glitchy
    Expand Collapse

    Joined:
    May 26, 2015
    Messages:
    832
    I can spawn in 2 cars with the highest settings possible, and still get the same FPS as I would with 2 cars at lowest graphics, and I will consider all of the above, thanks!
     
  4. Funky7Monkey

    Funky7Monkey
    Expand Collapse

    Joined:
    Oct 12, 2014
    Messages:
    977
    Send specs.
     
  5. Glitchy

    Glitchy
    Expand Collapse

    Joined:
    May 26, 2015
    Messages:
    832
    GPU: AMD Raedon R7 250
    CDU: AMD Quad Core 7850K
    Memory: 16gb
     
  6. EruptionTyphlosion

    EruptionTyphlosion
    Expand Collapse

    Joined:
    Sep 24, 2016
    Messages:
    2,927
    You're in the same situation as me. Upgrade the processor, that'll improve the physics performance. Your video card and RAM are fine, just upgrade the processor.
     
  7. Funky7Monkey

    Funky7Monkey
    Expand Collapse

    Joined:
    Oct 12, 2014
    Messages:
    977
    His video card is what is holding his system back. I recommend something decent used, or a new GTX 1050Ti.
     
    • Agree Agree x 2
  8. EruptionTyphlosion

    EruptionTyphlosion
    Expand Collapse

    Joined:
    Sep 24, 2016
    Messages:
    2,927
    Sorry, I really don't know much about computers, but he said that the video settings had no effect on the performance, thus leading me to believe that it was his processor.
     
  9. Glitchy

    Glitchy
    Expand Collapse

    Joined:
    May 26, 2015
    Messages:
    832
    Ah ok, thanks so much! :D
     
  10. Michaelflat

    Michaelflat
    Expand Collapse

    Joined:
    Jul 10, 2014
    Messages:
    1,543
    no its your CPU holding back physics
    to test which one is limiting, pause the physics, if the FPS goes up then you are limited by CPU, if the FPS stays the same (between 3fps difference) then you are GPU limited.
     
  11. SixSixSevenSeven

    SixSixSevenSeven
    Expand Collapse

    Joined:
    Sep 13, 2013
    Messages:
    6,960
    To be fair both CPu and GPU suck there
     
    • Agree Agree x 6
  12. Deleted member 126452

    Deleted member 126452
    Expand Collapse
    Guest

    I don't know, R3 1100 or what? Most comments I make here in this month are and will continue to be teasalicious fanboy comments about Ryzen processors though, take what I say with a bit of salt.
     
  13. Michaelflat

    Michaelflat
    Expand Collapse

    Joined:
    Jul 10, 2014
    Messages:
    1,543
    yeah that will play beamng good, get a good CPU cooler (Hyper 212 evo is a good start) since then you can overclock it. AMD Zen is good, not only for AMD though since Intel will be forced to lower their prices.
     
  14. Glitchy

    Glitchy
    Expand Collapse

    Joined:
    May 26, 2015
    Messages:
    832
    What would you recommend as a upgrade?
    --- Post updated ---
    Yeah, my CPU is the issue. I need to upgrade that. Thanks though, I never knew that trick!
     
    • Like Like x 1
  15. vagabond139

    vagabond139
    Expand Collapse

    Joined:
    Apr 24, 2016
    Messages:
    9
    Its your CPU that is holding you back if you change graphical settings but get the same FPS. Overclocking oddly enough doesn't make any real difference with the Kaveri architecture. Your only real option is going to be to get a new CPU, board, and RAM.
     
    • Agree Agree x 1
  16. Tsutarja495

    Tsutarja495
    Expand Collapse

    Joined:
    Mar 16, 2014
    Messages:
    819
    Well, it's become very apparent that my HD 7660D with 728 MB of DDR3 is less of a bottle-neck than my A10-5700 quad-core from 2012. Not sure what I can do because the FM2 socket has an awful upgrade path.
     
  17. fufsgfen

    fufsgfen
    Expand Collapse

    Joined:
    Jan 10, 2017
    Messages:
    6,782
    That is what sucks with computers, always need new motherboard, probably new ram, new cpu, that is costing money. Luckily improvements has been so small recent years that there is good number of usable hardware sold used, that might be one path to consider.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice