New engines and torque curves as a mod

Hey guys

Lately i have been making some realistic torque curve with the help of automation. These include
- an imitation of a honda b18 with vtec for the covet, but i can port to cars that have similiar size engines already available
- a custom higher performance stage 5 supercharger and accompanying radiator for the moonhawk that makes around 2200hp(i think)
-a higher revving and more powerful 3.9L v8 for the bolide that makes around 540hp at about 9000rpm
- lastly a bored 343ci V8 version of the 313ci engine in the burnside that also made around 500hp for drag racing.

The reason i am telling you this is because i would like some suggestions for engines to build with the help automation for the custom torque curves. Currently i will only take suggestions for N/A engines and supercharged engines (on car that support them) as i do not yet know how to manipulate the variables in the turbo files of the Jbeam and have not found any instructions or tutorials on what they mean.

Eventually i hope to create a mod pack that contains these engines for the community to use.

Also remember that i will only consider suggestions for engines that are similiar to engines currently available in cars such as bored out or stroked engines to make displacement larger or engines that are more powerful or rev higher or suggestions of real life engines.
It would also be appreciated if you could provide a bit of info about the engine to make research and implementation easier especially if it is a made up engine you would like me to create.

Sorry about punctuation and lack of grammar, but post was written wuickly to get all of my ideas out of my head.

Hope to hear your suggestions
CreasingCurve

 

Supercharged 6.4L HEMI engine from the Charger/Challenger Hellcats

 

A 4A-GE based off the covets 1.5 maybe?

 

@Spaceballs the Username, which car do you want me to put the Hellcat engine in? I could make it based of both the 5.5L V8 and the V8's in the Burnside, Moonhawk and the Barstow.

 

The Moonhawk is closest mechanically to the original Challenger so probably that one.

 

Actually I think the barstow is

 

You're right. The challenger has 3/4 speed manual options. I thought it had a 5 speed.

 

the frame is also different

 

Just to make sure i do what your asking correctly. You are asking for engine torque and characteristics of the 707HP Hemi engine used in the new charger and challenger Hellcat for the Gavril barstow, Correct?
--- Post updated ---
with a supercharger to take it up to 707HP

 

Yes. The NA version has about 485 bhp

 

full screen shot of progress of engine development in automation
this is the 6.4 NA hemi engine
next i will make the 6.2 NA hemi engine then adjust the supercharger to make it 707hp with the beamNG jbeam