WIP Beta released Ibishu 200BX 5.0 V8

Discussion in 'Content Creation' started by Angry_Bird, Jun 30, 2022.

  1. Angry_Bird

    Angry_Bird
    Expand Collapse

    Joined:
    May 25, 2019
    Messages:
    101
    https://www.beamng.com/resources/ibishu-200bx-5-0-v8.22824/

    Future plans WIP:

    1. Improved Dual Exhaust JBEAM (yes with flames) (DONE)
    2. ESC (Comfort and Sport mode) (DONE, not released until at least the engine piping and exhaust are finished improvement, may wait till the speedo and tacho are finished)
    3. Revamped speedometer (200 MPH, 250 MPH), see Additional notes
    4. Revamped tachometer (up to 9000 RPM), see Additional notes
    5. Improved Engine piping and adding upgraded radiator model (using Bolide's radiator plus oil cooler) (DONE)
    6. Custom V8 Lettering
    - V8 for V8 base
    - V8 S for V8 Performance
    - V8 TT for V8 Twin Turbo
    - V8 TT R for V8 Twin Turbo 1100 and onwards


    Additional Notes about 3 and 4. They will be using a digital dashboard sourcing @Nekkit 's Bolide Expansion pack's digital dashboard

    What's done?

    The Dual Exit Bumper (Credits to @D-Troxx)
    The V8 Engine model (using Midsize I4 parts)


    Trims and their gauges (WIP and as for my personal note on what needs to be worked on):

    V8 Base:
    Speedometer is up to 200 mph
    Tachometer is same as the original 200BX

    V8 Performance (and Police version):
    Speedometer is up to 200 mph
    Tachometer is upped to 9000 RPM max with 8000 RPM redline

    V8 Twin Turbo and so on for any configs with twin turbos:
    Speedometer is up to 250 mph
    Tachometer is upped to 9000 RPM max with 8000 RPM redline

    NOTE I WILL KEEP UPDATING FOR ANY PROGRESS AND SETBACKS

    Comment below if you can provide help (especially for the gauges for the tachometer and speedometer, even better if for the digital dashboard to skip the work for the analog gauges)
     
    #1 Angry_Bird, Jun 30, 2022
    Last edited: Aug 10, 2022 at 6:27 PM
    • Like Like x 1
  2. moses72

    moses72
    Expand Collapse

    Joined:
    Feb 4, 2021
    Messages:
    1,622
    rotsun config with t300 turbo sticking out of the hood and (possibly) custom paint?
     
  3. Angry_Bird

    Angry_Bird
    Expand Collapse

    Joined:
    May 25, 2019
    Messages:
    101
    Idk if I will make an externally mounted turbo with cut hood but might look into a custom skin of mine (simple Cardinal Tuning GmbH racing skin). That said I will need to make a racing dashboard first.
     
    • Like Like x 1
  4. a!ek

    a!ek
    Expand Collapse

    Joined:
    Jun 30, 2022
    Messages:
    1
    This setup is amazing for drifting! But sadly the exhaust has no texture in-game for me. I seem to be the only one with this issue but still thought I would point it out to you. Thx for the great mod!
     

    Attached Files:

    • Capture.png
    • Like Like x 1
  5. Angry_Bird

    Angry_Bird
    Expand Collapse

    Joined:
    May 25, 2019
    Messages:
    101
    screenshot_2022-06-30_01-31-38.png

    Isn't happening to me so far, will takes notes for future updates and talk to @D-Troxx for the future developments as stated in the thread.
     
  6. Angry_Bird

    Angry_Bird
    Expand Collapse

    Joined:
    May 25, 2019
    Messages:
    101
    Some reflections on the future of the mod...

    Here are my new engine pics in blender, it will feature more simple piping as well as upgraded radiator and oil cooler from the Civetta Bolide.

    20220630_215711.jpg 20220630_215720.jpg

    However there are some issues as well, in particular there are the exhaust jbeam as well as the models (since I would be using the stock models for both normal and fartcan model but on dual exit instead). A lot of times one side's model break like partially transparent and the audio and fire jbeam only works on one side (which the 1.0 version suffers from). I have pmed @D-Troxx and he said that he is quite busy right now and he doesn't have much time to clear this issue out. So if anyone that has the expertise I would gladly accept. It is a big mod unlike other simple engine swap mods (will include proper custom exhaust jbeam as well as digital dashboard) so it will take some time.

    Also the dashboard I do have some ideas, which will use @Nekkit 's Bolide Expansion pack 's digital dashboard (ofc not the entire cluster) but just to put it to replace the gauges of the stock 200BX. I have zero experience in putting new customized gauges so I will definitely need to borrow some help. Another reason why I use that is to simplify the customization of the gauges into making one single gauge display for the V8 200BX.
     
  7. Angry_Bird

    Angry_Bird
    Expand Collapse

    Joined:
    May 25, 2019
    Messages:
    101
    Update: Fixed the exhaust jbeam (meaning audio and fire will work much better) with the help of @D-Troxx , now only digital dashboard left...
     
  8. Angry_Bird

    Angry_Bird
    Expand Collapse

    Joined:
    May 25, 2019
    Messages:
    101
    Guys I am having huge problems about putting a digital dashboard. I think that the slot should be around "coupe_interior_accessories" with the flexbodies of the said screen and the glowmap as well, with the custom naming of the files as well. @Nekkit @Car_Killer Thoughts?

    Here is the file btw as I put it with the dashboard(covering the moving vanilla gauges ofc)
     

    Attached Files:

    #8 Angry_Bird, Jul 10, 2022
    Last edited: Jul 11, 2022
  9. buddy boyo

    buddy boyo
    Expand Collapse

    Joined:
    Jan 9, 2016
    Messages:
    33

    same problem here
     
  10. Angry_Bird

    Angry_Bird
    Expand Collapse

    Joined:
    May 25, 2019
    Messages:
    101
    I am still working on the mod waiting for the digital dashboard tbh. I would release a new version when the digital dashboard screen is ready as I have really zero knowledge about the dashboard and gauges.

    Also based username.
     
  11. Angry_Bird

    Angry_Bird
    Expand Collapse

    Joined:
    May 25, 2019
    Messages:
    101
    When I was thinking around I might need to remaster the whole engine tbh, I might just use the Bastion parts as the main parts for the engine model tbh. I know all your problems regarding the exhaust but I would like to release everything (aside the badges for now as I will ask someone else to help with them) in the next release rather than too many patches.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice