This is the ETK I-Wagon As a member of the I-series family, the I-Wagon was made for the American families that needed a big car, but at the same time, wanted a fast car that was not as boring as a Minivan. Things to do (green = finished ,orange = wip ,red = not start yet) - Finish mesh - find a way to package it on a .zip file - Fix textures (Help needed, no idea how to do it) - Modify the windows and doors (Do i modify them and the doors on the body mesh?) - Jbeam. (Serious help needed here too) Credits : -Me and anyone who is willing to help me get this mod done once and for all. Pictures View attachment 225449 --- Post updated --- Polished the D Pillar and Filled some of the holes. Still searching for ways to mirror the modified part. -27 of January 2017- I restarted the entire mesh and got way better results, and way less holes. Also thanks to mirroring the mesh, no more weird problems. As you can clearly see, There is almost no holes, but there is some problems with textures and filling the C to D Pillars. Thanks to @burilkovdeni for fixing the packaging and the No texture problem
A 4-Liter with 250 some HP would be cool The I-Series is an old 5-series really. https://en.wikipedia.org/wiki/BMW_5_Series_(E34)#Petrol_engines
i would ask you to do it, but i dont want you wasting your work, as i fear that i will end up stuck after im done with the mesh.
Its not as cut up as it may look. The bare shape is done and all i need to do is to fill the holes and make it look like a car and not a flat surface. if you are willing to help, thanks! PM me.
By this do you mean just hp/torque curves, or actual models, because I have been trying to get some help on how to make and add custom engine models, I have a few ideas for a mod pack but don't know where to start with adding models (the tutorials show very basic content creation)
Just power and other programming, like fuel economy, block type and oil. And a specially geared 5 speed automatic transmission. I probably will try modeling through. Don't worry, even if it does end up stuck then I get a cool new mod to release. And AWD V8 ETK? Insane at the drag strip. Stock!
After discovering a way to mirror my work, i decided to restart all work since the old mesh was a mess. It may look funky, but it was the 80's. everything was possible back then. ITs keeping the Chevron shape.
Not bad, but tbh I would have modeled it after an E30 3 series wagon. Also, maybe a two door shooting brake version?
I had that idea at the start, but it looked ugly. VERY ugly. Shooting brake? Maybe. if i even manage to get the Stock wagon out.
The I-series is a cocktail of European Family sedans. From parts from the 3 and 5 series, To Volvos. Its all in there somewhere. --- Post updated --- Rear Trunk now WIP. Also cleaned up the mess from loose parts and stuff
The windows (Atleast the C To D Pillar window) IS keeping the chevron shape. --- Post updated --- Mod work is on halt until i figure out textures and glass. I hope i can figure out this as soon as possible.