Well i'm back with another engine mod, this time its for the Burnside, it took me a few hours to get it where its at right now and i'm pretty happy with the turnout. I tried to keep it as realistic as possible power/torque wise as if it would come factory with this engine as a "performance" package.. 5.7L Performance V8 It has a race cam and dual barrel carb w/ performance air filter. Torque curve was created via Automation with year preset to 1953. 357 HP @ 5000 RPM 381 FTLBS @ 4500 RPM I also made a 4 speed automatic race transmission to pair up to the 5.7L. its very similar to a TH400, with a added 4th gear. Its only a engine.jbeam edit so this mod, is still using the stock 313 CI V8 mesh. I will be updating this, getting the shifting refined and editing the torque curve via automation. (The reason for the power/torque is pointed to high rpm is to keep the stress off of the rods and crank in automation as it is only cast rods/crank.) It gives the burnside alittle pep in its step Install Drag and drop into mods folder. Enjoy
