Beta WideBody Moonhawk 0.4

It's wide ,It's right (Now with AWD ,4WD)

Tags:
  1. MillenniumJadeā„¢
    MillenniumJadeā„¢
    5/5,
    Version: 0.4
    T H I C C
  2. JC_02
    JC_02
    5/5,
    Version: 0.4
    hey that's pretty good
  3. MrEthan520
    MrEthan520
    5/5,
    Version: 0.4
    Sorry for being rude previously. This mod is excellent. Hope to see more soon.
  4. thatguy47
    thatguy47
    3/5,
    Version: 0.4
    i like this, its a good idea, looks good and work to a degree, however, it doesn't feel like the best execution, i like the idea of AWD but it is a broken system, if you look at the power train debug in-game you find that the transfer case has a 'dummy shaft' associated with it this means that as you accelerate it spins the shaft and driveshaft for the front wheels and after you come to a complete stop, even in neutral, the 'dummy shaft' will begin to work backwards and spin the wheels making the car move again it also worsens the braking performance because you have to work against the 'dummy shaft' as well as the car momentum. the bodywork, while good, needs refining, in the V2 widebody the roof visibly shakes under hard acceleration this is probably caused by the addition of the roof scoop, which looks cool but is fixed so it cant be removed, since you made the new body perhaps you could make the roof scoop a separate and selectable piece rather than make it permanent and the pre-existing flares are still and option for the body and fenders - this should be removed so that it doesn't clash with your widebody, on a more personal note, while i like to look of the V2 widebody i think that if you started at the furthest edge for each panel, up to the back of the doors in the rear to the rear bumper and each edge of the fenders it would create a smoother, cleaner look and less like a bolt-on flare, the front nosecone, i like the big chin spoiler but what about a custom fascia that has a slot for a selection of chin spoilers of different shapes and sizes each could be made with different downforce values and it would help future-proof your mod so you can continue to expand on it later, finally the side-skirts, while they look good they are again a fixed part that can be removed like the roof scoop and that could be changed as i mentioned above they also block the side-pipe exhaust if you were to add a hole to them and make room for the side-pipe this could be avoided and make it look tidier. all in all i like this mod but i think it could be better-executed and improved.
    1. Peter Beamo
      Author's Response
      about the vibration of a car .It's not because of roof scoop :)
      it's because a track width.
      anyway thx for the advise!
  5. scottshamblin
    scottshamblin
    5/5,
    Version: 0.3a
    This looks like it could be in Fast and Furious.
    We need a widebody Barstow though...
    1. Peter Beamo
      Author's Response
      Yes! I got an idea from FF8
      and widebody barstow ,I will try! thx
  6. Sunset Drive
    Sunset Drive
    3/5,
    Version: 0.3a
    Okay, KINDA like the idea, but the half cover widebody looks KINDA nodegrabbered, and the front diff you added does not come with a transfer box, and the diff itself is 1:1, so it doesn't match the rear.

    Poor execution 6/10
  7. FORDBEAMER
    FORDBEAMER
    5/5,
    Version: 0.3a
    Widebody sbr4? And 200bx?
    1. Peter Beamo
      Author's Response
      200Bx is in prgress
      Sbr ........maybe :)
  8. CaptainZoll
    CaptainZoll
    5/5,
    Version: 0.3a
    The widebody 2.0 looks sexy af!
    1. Peter Beamo
      Author's Response
      X) Glad u like it!
  9. ThatCarGuyDownTheStreet
    ThatCarGuyDownTheStreet
    5/5,
    Version: 0.3a
    Widebody I-Series next???
  10. ThatGuyRice
    ThatGuyRice
    5/5,
    Version: 0.3a
    LOVE THIS!!!!!!!! Please make more mods of this type! :D
  11. Darkiplier
    Darkiplier
    5/5,
    Version: 0.3a
    LOVEEEEEEEEEEEEEEEE IT! Could you make a supercharger lvl 4, but only with the style of it, do you know what I mean? A supercharger, but for the style :P
    1. Peter Beamo
      Author's Response
      I think I already did that :/
  12. Kuthlive
    Kuthlive
    5/5,
    Version: 0.3a
    hell yeah! the AWD makes it so i can create a decent off-road widebody moonhawk. i didn't think it could get better, but it did!
  13. kikiki
    kikiki
    5/5,
    Version: 0.3a
    i love it
  14. Blijo
    Blijo
    5/5,
    Version: 0.3a
    Oy! A hoonhawk :D
    1. Peter Beamo
  15. mrpotsilog12
    mrpotsilog12
    5/5,
    Version: 0.3a
    Can you make a replica of Vaughn's 1969' RTR-X Mustang? Thanks for the mod btw. :)
  16. BDOGquickscop
    BDOGquickscop
    5/5,
    Version: 0.3
    Absolutely love it. Also, I would like to make a request. A Smokey Bandit 1977 Pontiac Trans Am Skin and body modification (different from
    F150 Ranger's Barstow Bandit) for this wide body model.

    Please include the following, if you choose:

    1. Make a custom fascia and lights, rims, hood, engine, trunk, wing, rear panel, and anything else that I might be missing that resembles the '77 Trans Am

    2. Create a skin design to F150 Ranger's (or just ask him for permission to use it)

    3. An option to have a T-Top roof (the legit thing, or maybe even two roofs, one with the convertible like roof along with the roof divider, and the second T-Top consisting glass ceiling covering both sides of the tops while keeping the divider on the roof?)

    4. A Butler Performance '77 Pontiac Trans Am BAN motor build.

    5. A custom sound of a '77 Bandit Trans Am would be much appreciated and truly make it complete.

    6. An interior design of the '77 Bandit Trans Am (might also be called The Burt Reynolds Edition) in the black and gold design. Has a steering wheel with the Pontiac bird in the center of it, leather seats with the Bandit design on them, and door panels and a dash board would all be great for detail.

    This seems like a lot to ask but nothing is impossible, to a point. Below are links that you might find helpful for this request.

    https://commons.wikimedia.org/wiki/File:1978_Trans-Am_bandit.jpg#/media/File:1978_Trans-Am_bandit.jpg

    http://www.hotrod.com/articles/hrdp-0708-1977-pontiac-firebird-trans-am-bandit-edition/#

    http://butlerperformance.com/c-1267471-engines-blocks-engine-kits-butler-crate-engines-complete.html

    Just ask if you need anything.
    Sincerely,
    A Fan
    1. Peter Beamo
      Author's Response
      thx! but please use a discusstion tab next time :)
  17. Graf LOLtube
    Graf LOLtube
    5/5,
    Version: 0.3
    NICE NICE NICE NICE NICE
  18. BugHelppperrrr
    BugHelppperrrr
    5/5,
    Version: 0.3
    noice
    1. Peter Beamo
  19. KaiserimnopYT
    KaiserimnopYT
    5/5,
    Version: 0.3
    awesome like usual with you
    1. Peter Beamo
  20. Max8Adam
    Max8Adam
    5/5,
    Version: 0.2
    Could you try to make a widebody for the sunburst
    1. Peter Beamo
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice