Every race car at some point needs maintenance or repair, it is inevitable. Thus, every car must be lifted from the ground and held securely in the air. A significant portion of these cars will be lifted manually. Time and physical effort are used here, ineffectively. The development of the SWIFTJAX system will attempt to target race car series across the world and individuals. Using a low-profile fluid based universal jacking package, to save time and physical effort. SWIFTJAX will give users the ability to choose when, where and how a car can be lifted to conduct minor maintenance, whilst being portable, reliable, and durable.
Features
Two different versions:
-Realistic:
- 150 Millimeters (2 tons)
- 225 Millimeters (2.5 tons)
- 300 Millimeters (3 tons)
-Unrealistic:
- 150-225-300 Millimeters (~30 tons)
- 10 Meters
- 100 Meters
- 1000 Meters
You are able to change the speed of the jack, with a variable, in the tuning menu. With all the jacks, you can change the width and the length between them (base size is 1m width and 1.3m length). You are also able to add collision between the jack in the part selector. Some versions are here for fun, especially the 100m and 1000m.
Whilst the hydraulic unit is only to enhance the realism, you can add or remove it from the part selector, and you can also change the distance of it , from the jacks themselves, in the tuning menu.
Controls
Credits
- Arrow up: extend the jack
- Arrow down: retract the jack
- Xinput (on a controller): extend/retract the jack
- Fraz: Creator of the project, the 3D model and the presentation video
- @SubieBerry: Textures and help in general
- Me: Jbeam and all other stuffs
If you find any malfunctions or other problems, please send them to me by private message.
*The vehicles present on the images are not part of the mod
Dismiss Notice
In the upcoming weeks mod approvals could be slower than normal.
Thank you for your patience.
In the upcoming weeks mod approvals could be slower than normal.
Thank you for your patience.
SwiftJax 1.1
A Universal Jacking Package
Recent Updates
- Reference nodes changes May 8, 2023
