Beta Realistic Cummins Engine Pack for D-Series 1.9

Adds 4 of the Cummins B-Series engines and 6 Transmissions

  1. More small things

    Sorry for no update in a while, I am trying to figure out how to make a custom 3D model for the engines.

    -Added cold air intake, it adds about 15HP, I will hopefully be making a custom model for it soon:)
    -Fixed Variable Boost Turbocharger not showing up for the 5.9L 6BT 12V Cummins
    -Tuned Variable Boost Turbocharger, It was making the engines more sluggish when cruising at partial throttle
    -Added adjustable Idle for 5.9L 6BT 12V Cummins
    -Tuned torque curves
    -Hopefully all transmissions...
  2. Add Built Trans for 6.7L and Added Variable boost turbos

    -Added Variable boost Turbochargers for all engines
    -Removed Performance turbos because the Variable boost Turbos can make more power
    -Tuned 47RE Transmission to shift at a higher RPM for governor springs
    -Added Built Transmission for 6.7L Cummins
  3. Tuned Transmissions

    - Fixed the engines hitting the rev limiter before shifting (thanks to "ahza2496" for helping me out!)
    - Tuned engines a little bit
    - Tuned a bit of small things
  4. More stuff for 6.7L Cummins

    - Added G56 6-speed manual transmission for 6.7L Cummins
    - Added 2 quick configs for 6.7L Cummins
    - Slightly tuned torque curves, you probably won't even notice a difference
    - Fixed duplicate transmissions with both 24V Cummins engines
  5. Added 6.7L Cummins and changed some stuff :)

    - I made a rough draft of the 6.7L Cummins as well as the 68RFE, it's far from done like all of the other engines so I would love some feedback and to see what you want as some upgrade options.
    - Slightly changed the engine names to be a bit "more proper".
    - I would like the add the Aisin 6-speed Automatic transmission.
  6. Slight Torque Curve fix

    -Fixed the torque dropping at 2000 rpm's and then climbing again, keep in mind that the torque curve still needs a lot of work :)

    Thanks to warkus for the modding tip!


    1. TorqueCurveAfter.png
  7. Fixed Stock Turbo Sound

    I meant to fix the Stock Turbo Sound in the last update but here ya go :)
  8. Tuned Trans and Added new Muffler

    - Tuned the "Built 48RE Transmission" to shift harder but not too stiff for street friendliness.
    - Added a "Magnaflow Muffler" for a tiny bit more power and a louder exhaust note. It is under the "Muffler" category in the parts menu.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice