Ibishu BX-ETK I-Series Inline 6 Swap 1.1.1

Welcome to my first-ever-released mod. Adding both the 2.4 and 3.0 litre Inline-6 engines to the Ibishu D13, as I call this car.
It features six configurations, almost all powertrain parts from the ETK I-Series, including transmission options, turbos (with customised intercooler pipe model), stock intake with a different pipe design, sport intake with a cone filter and as additional parts from me: individual throttle bodies and Stage 3 Performance Long Block for the 2.4 litre, so you can reach 9k RPM.

---

About the visual aspects, I've also made eight different hood types with a cowl, which can be selected from a slot in a custom hood part called "ETK Inline-6 Cowl Hoods", because of the engine sticking out of the hood line.
Unfortunately, the hoods were made before I put the turbocharger in the enginebay, so there isn't any Cut Hood or a different variation of cowl hood for now. If you want to install a turbocharger, when you use RHD interior, use "Right Hand Drive Dashboard with Replaced Brake Servo", because of the brake servo colliding with the turbocharger. There is only a tubular frame option to prevent chaos in the parts selector. And lastly, for the visuals, use "ETK Inline-6 Custom Extended Rear Driveshaft" and "ETK Inline-6 Strut Bar".

---

All credits to BeamNG devs for making original 3D models, and credits to me for making a custom material for the engine parts, editing .jbeam and arranging configurations.

---