This is a sound mod based on nascar V8 engine with approximately correct torque spec. No custom engine model.
I made a configuration for each car that behave well with G27 steering wheel.
this mod work with stock engine block and stock intake.
Pickup need "NASCAR ecu" for let the engine rev up to 9.5k rpm
Late Model overheat a lot, i try to make better radiator but it's not showing in parts list so i simply deactivated engine thermal simulation.
If you oversteer too much, you can add more grip to the rear tires by open "latemodel_suspension.jbeam " (in your latemodel mod) and go down to the line n°702 and change frictionCoef and slidingFrictionCoef. I put 1.76 and 1.50 (30% more grip).
![]()
D-series pre-runner with AWD and 6 speed manual gearbox
![]()
D-series, RWD version is hard to control so i also made an AWD version.
![]()
Barstow
![]()
Bluebuck
![]()
Moonhawk
![]()
Barstow f2 (version 1.05)
![]()
If you want to use automatic transmission, you'll need to change the torque converter by the "4000 high stall converter" because of the high engine idle.
![]()
link for Late Model
https://www.beamng.com/threads/late-model-stock-car-lmsc-2020-updated.45161/
link for barstow f2
https://www.beamng.com/resources/gavril-barstow-f2.14646/
My first public mod.

358 ci nascar engine 1.05
nascar engine sound mod
Recent Updates
- add barstow f2 + little engine change Mar 1, 2021 at 8:40 PM
- add custom starter sound and fix drag transmission Feb 15, 2021
- add moonhawk and torque converter Feb 5, 2021