It's almost 100% compatible with this. The suspension from this pack can't really be used, but it's awesome
minor bodywork, add remaining parts and textures, will update tomorrow afternoon if it all goes well. --- Post updated --- yeah, @crashmaster, the author of that limo mod, is actually a friend of mine in real life. He's the one who showed me BeamNG and i also learned modding from him. He often helps me when i get stuck and he also does most of my collisions because i still can't use BNEditor properly yet.
I know the limos been made. And true. It already has 4 doors. --- Post updated --- Oh dang! Keep going man!
So I was looking at jeep mods, and I found something that I think the Hopper desperately needs XD It's a top that converts the jeep into a super-shortbed pickup
Not sure what is causing it, but after some rock crawling, the rear suspension is no longer centered. I've had this problem ever since the Hopper was added. It will eventually lead to the rear driveshaft breaking.
that'll happen if your doing some heavy offroading and if your axle hits the ground to hard while going fast on rocks and the drive shaft will break from moving to the left or right to much
Too hard might be an understatement. I didn't know if it was a problem though. It took a lot for it to do that.
Sure Left to right Prerunner with IDFS set up as close to a trophy truck as I can get it Class 3 d15 with solid axles all around, ment more as a entry class Class 3 hopper with off-road super soft suspension tuned to reduce the back end bounce as much as possible When I can get some wifi I'll be uploading them to the mods section
Probably something wrong on my end, but the axle on the high lift frame is lower and not lined up with the wheels. These are the same configs otherwise.
i don't know why you guys have all those issues, everything is fine on my end. maybe the update could fix this
using wheelhub mods will mess up with this mod for sure, i already have the wheelhub conversion included in the suspension jbeam --- Post updated --- the 44's clip through the body quite a bit, i have no other option but to build a full tube front end too does wheelies though (with the WIP diesel engine)
