Here's a peek to a Configuration Pack that will probably never be released since I'm not assed to make it happen as the competition is too fierce lolzers~ In 2015, Hirochi released an ultra-high performance variant of their Sunburst. Dubbed the Sunburst RS Type TS, which is an abbreviation for Track Sport, the RS TTS came with fully adjustable suspension, shocks, 6-speed manual transmission, carbon fiber front and side skirt accents, race wheels, and a large downforce-inducing wing, whilst maintaining the RS's turbocharged 4-cylinder engine. A truly quick car that will dominate any track that you visit.
Ok so i missread my sources a bit on the last progress image i posted, that plate is not the 1987 plate, it's the 1979-1986 plate, the 1987 one was borderless, and then had a border again in 1988, with a slightly changed font before switching over to the lobster plates in July of that year. So here is the actual 1987 plate , i'll be adjusting stickers on the previously shown plate to show the correct years.
You have to release your config pack, don't be afraid about competition, your config has a way deeper back story than mine first cars did
Just finished the entirity of the 80's maine plates. It wasn't that hard considering they were all black on white, or used existing assets like the lobster backplate i already had. From L to R: Civetta: 1988 B/W Plate (was used for a few months untill the switchover to lobster plates, has a minor change in the "A" in Maine compared to the 1979-1986 and 1987 plates) Pigeon: 1979-1986 B/W Plate Covet: 1987 "Blank" Plate, this was used in '87 only before switching back to B/W, the main difference is the embossed center area of the plate, with 2 slots at the bottom for tags. D-Series: 1988 Lobster Plate, Compared to the 1989-1993 plate, it has a minor difference in the number "1". This covers the 1980s, when i get home i'll start working on the 70s plates. getting closer towards a release.
Hirochi SBR4 Rally. 2 Liter turbo, 300+ HP, 4WD, Rally tires, and a buttload of cash. Can you handle it?
When you have that fixed, you'll also have to make the Speedometer in Km/h, and reverse the wiper/indicator stalks
just started this it is supposed to end up being an runway the dot is a burnside. does it look long enough to land a small plane? this is just a five minute thing i plan on making it better.