2010-2016 Cherrier UrbanX It's based on the IRL Dacia Duster, but lore friendly, built on an early version of the platform that later evolves into the 2020 Cherrier FCV platform (specifically the Tograc). Technical Overview - Body: 5-door SUV - Drivetrain: FWD and AWD - Suspension: Raised for bad roads - Engines: Same as the FCV ones - Interior: Not started yet (it is gonna be scratch made, not taken from the original model) - ¹Tuning Parts: Planned (visual + some offroad tuning in addition to the FCV's tuning parts) Progress Progress Percentages: - Exterior: 75% - Chassis: 40% - Materials: 30% - JBeam: 10% - Interior: 0% - Configurations: 5% Progress List: - Front part: Almost done (headlights glass and glowmaps are yet to be made) - Center section (doors /sides): Partially made - A, B and C Pillars: Done - Rear part: Partially finished (only Trunk, glass and parts of the lights are yet to be implemented, as well as separating trunk from body mesh) Lacks - Chassis is being implemented currently - Doors and side body not implemented yet - Most materials are placeholders - Rear needs a lot of work - Front needs more detail - Interior not started - No configs, parts or ¹tuning parts yet - No facelift planned Planned Config List Base & Daily - UrbanX 1.4 Base (M) Barebones, steel wheels, no extras - UrbanX 1.4 Comfort (M/A) Basic interior, hubcaps, simple radio - UrbanX 1.5d Base (M) Diesel, slow but very efficient Mid Range - UrbanX 1.6 Comfort (M/A) Better interior, alloys, small upgrades - UrbanX 1.5d Comfort+ (M/A) Diesel with comfort suspension, longer gearing, Luxe trim exterior parts - UrbanX 1.6 AWD (M) Simple AWD system, more grip for bad roads Adventure / Offroad - UrbanX 1.6 AWD FieldSpec (M) Raised suspension, steel wheels, offroad tires - UrbanX 1.5d AWD Utility (M) Diesel + AWD, very practical build - UrbanX 1.6 AWD Trail (M) Slightly more equipped offroad version Sport/Tuning / Fun - UrbanX 270 S (A) Sport model with a larger 4-cylinder engine and sport suspension. Foundation for future Cherrier nameplate system and sport trims (yes, a bulky crossover...) - UrbanX 1.6 Street (M) Lowered, alloys, basic street tuning - UrbanX 1.6 Turbo (M) Light turbo setup, more power - UrbanX 1.6 Rally (M) Stripped interior, offroad suspension, rally vibe - UrbanX "Arsenic Concept" (M) Experimental 5-cylinder setup, aggressive tuning, concept-style build Special / Work - UrbanX 1.5d VanSpec (M) Rear seats removed, cargo focused - UrbanX Taxi (M/A) Basic spec, taxi config - UrbanX Service (M) Roof rack, tools, utility setup - UrbanX Gendarmerie (M) Same as "UrbanX Service (M)" but with police equipment Joke / Beater - UrbanX 1.4 "No Budget" (M) Missing hubcaps, bad condition - UrbanX 1.4 Beater (M) Rust, dents, abused config - UrbanX "Romania Special" (M) 5-cylinder swap, full matte blackout, lowered suspension, loud exhaust Gallery (not in chronological order) Notes -This is an early WIP, so expect heavy changes. -"Urban '10 - Low poly model" (https://skfb.ly/pAOWx) by Daniel Zhabotinsky is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/). PROOF OF PERMISSION: Spoiler: Permission Proof Credits @ImNotConfused: Amazing materials @BaconBeam: Fantastic drivetrain inspired from the real Dacia Duster Me: Everything else BeamNG: The wonderful Cherrier FCV platform
As someone who's quite fond of the Duster, it excites me to see a lore-friendly version in development. I wonder if it could be possible to get permission to use the Miovi branding, since that is a lore-friendly Dacia, then the Cherrier branding could be used for export market models.
Yes, I will contact him for permission --- Post updated --- Just asked Stiv for Miovi brand permission, but I doubt he will respond soon, as his last post is from January... --- Post updated --- Thanks
We got more stuff!! --- Post updated --- BTW, does anyone know how to make a mesh visible from the inside? I mean, if you look closely, you can't see the right side panel in the photo above, but you can see the left one, since the outer side of the left panel faces the camera, while the inner side of the right panel also faces the camera but is invisible.
There’s no way to make the back side of a single‑sided mesh visible in BeamNG or in most 3D games. You should try using the Solidify modifier in Blender You can also solve this by adding an interior
the latter is way more recommended than using solidify on things like body shells. it adds unneccessary polycount
Thanks! --- Post updated --- Solved the face problem and now hood is openable (it was part of the body mesh previously)
For now this is the config list: Base & Daily - UrbanX 1.4 Base (M) Barebones, steel wheels, no extras - UrbanX 1.4 Comfort (M/A) Basic interior, hubcaps, simple radio - UrbanX 1.5d Base (M) Diesel, slow but very efficient --- Mid Range - UrbanX 1.6 Comfort+ (M/A) Better interior, alloys, small upgrades - UrbanX 1.5d Touring (M/A) Diesel with comfort suspension and longer gearing - UrbanX 1.6 AWD (M) Simple AWD system, more grip for bad roads --- Adventure / Offroad - UrbanX 1.6 AWD FieldSpec (M) Raised suspension, steel wheels, offroad tires - UrbanX 1.5d AWD Utility (M) Diesel + AWD, very practical build - UrbanX 1.6 AWD Trail (M) Slightly more equipped offroad version --- Tuning / Fun - UrbanX 1.6 Street (M) Lowered, alloys, basic street tuning - UrbanX 1.6 Turbo (M) Light turbo setup, more power - UrbanX 1.6 Rally (M) Stripped interior, offroad suspension, rally vibe - UrbanX "Arsenic Concept" (M) Experimental 5-cylinder setup, aggressive tuning, concept-style build --- Special / Work - UrbanX 1.5d VanSpec (M) Rear seats removed, cargo focused - UrbanX Taxi (M/A) Basic spec, taxi config - UrbanX Service (M) Roof rack, tools, utility setup - UrbanX Gendarmerie (M) Same as UrbanX Service (M) but with police equipment --- Joke / Beater - UrbanX 1.4 "No Budget" (M) Missing hubcaps, bad condition - UrbanX 1.4 Beater (M) Rust, dents, abused config - UrbanX "Romania Special" (M) 5-cylinder swap, full matte blackout, lowered suspension, loud exhaust --- Post updated --- For now this is the config list: Base & Daily - UrbanX 1.4 Base (M) Barebones, steel wheels, no extras - UrbanX 1.4 Comfort (M/A) Basic interior, hubcaps, simple radio - UrbanX 1.5d Base (M) Diesel, slow but very efficient --- Mid Range - UrbanX 1.6 Comfort+ (M/A) Better interior, alloys, small upgrades - UrbanX 1.5d Touring (M/A) Diesel with comfort suspension and longer gearing - UrbanX 1.6 AWD (M) Simple AWD system, more grip for bad roads --- Adventure / Offroad - UrbanX 1.6 AWD FieldSpec (M) Raised suspension, steel wheels, offroad tires - UrbanX 1.5d AWD Utility (M) Diesel + AWD, very practical build - UrbanX 1.6 AWD Trail (M) Slightly more equipped offroad version --- Tuning / Fun - UrbanX 1.6 Street (M) Lowered, alloys, basic street tuning - UrbanX 1.6 Turbo (M) Light turbo setup, more power - UrbanX 1.6 Rally (M) Stripped interior, offroad suspension, rally vibe - UrbanX "Arsenic Concept" (M) Experimental 5-cylinder setup, aggressive tuning, concept-style build --- Special / Work - UrbanX 1.5d VanSpec (M) Rear seats removed, cargo focused - UrbanX Taxi (M/A) Basic spec, taxi config - UrbanX Service (M) Roof rack, tools, utility setup - UrbanX Gendarmerie (M) Same as UrbanX Service (M) but with police equipment --- Joke / Beater - UrbanX 1.4 "No Budget" (M) Missing hubcaps, bad condition - UrbanX 1.4 Beater (M) Rust, dents, abused config - UrbanX "Romania Special" (M) 5-cylinder swap, full matte blackout, lowered suspension, loud exhaust Oui Je le parles (mais ce n'est pas perfect )
