Vulkan API – Feedback, Known Issues, and FAQ

I have a laptop with an RTX 3070 and Ryzen 9 5900HX and am also getting much worse performance across the board in Vulkan in 0.33. West Coast USA loads, but stutters, and large, demanding maps like Fairhaven and Los Injurus either give up loading entirely or load and then freeze immediately. In 0.32, every map ran better on Vulkan with the exception of Los Injurus and American Road, and even then only with dynamic reflections turned on. I have also double-confirmed that the game is running on the RTX 3070 instead of the integrated graphics.

 

I'm not sure if others have experienced same, but it seems to be impossible to change resolution from 1920x1080 which is highest option and native resolution.

When I select 1280x720 resolution and press apply, resolution just simply refuses to change.
I would like to play at lower resolution as some text are slightly larger and easier to read in world editor when using lower resolution.

Borderless and Exclusive behave in same manner it seems.

I can change resolution in DX11 mode normally, but when I start Vulkan version resolution will change to 1920x1080 so that when launching DX11 version resolution is again 1920x1080. perhaps designed to be so or a bug?.

AMD Ryzen 9 5900x
Nvidia RTX 4070 driver 565.90 also issue persisted with much older driver version
Windows 11

 

...

 

In Vulcan mode, when switching to traffic cars using the tab key, fps drops to 15-16. At the same time, everything is fine in directx 11. And also sometimes, literally for 1 millisecond, the screen turns partially white or green. This is clearly not a problem with the video card, because there is no such thing in directx 11

 

Any improvements for low end AMD GPU's?

 

Vulkan seems to be still stuck in desktop resolution in 0.34, option box allows choice of different resolutions, but resolution seems not to be changed. Choosing resolution does work normally in DX11 mode.

 

Unfortunately, I am still having the exact same problems I reported earlier. I have an RTX 3070 with driver version 566.14 DCH WHQL and only the NVIDIA Control Panel installed, not the new NVIDIA App, GeForce Experience or the GeForce Overlay. I am not sure if it is the Studio or Game Ready driver and there is stupidly NO way of checking which one it is after installation; maybe later I will try the latest Game Ready driver since I suspect it could be the Studio version (and is outdated anyway).

 

Hey there! I don't think I can really add much to this update as the results are almost identical as in 0.33...
Trying to load any map bigger than GridMap freezes the game in the loading screen, drops the GPU usage to 0% and starts eating all of the RAM.
I have only been able to load into WCUSA by setting my graphics to lowest on the main menu, but as soon as I try to set them any higher than that the game refuses to respond.
It's quite a shame but it is what it is, I can provide more info if needed to help fix this issue

 

I have an issue where the games slows down to about 15fps from 100fps usually, it seems to happen on big maps like italy or wcusa

as when vulkan came out a while back, it seems to be caused by high framepresent stutters

Specs are as in my signature

 

Game freezes when loading in using vulkan

 

Got a problem when using Vulkan. When i trying to load with vulkan, the game load but fps is around 10-15. Cpu load 100% by FramePresent. Any solution or new version bug?
I5-11400f
Rx7600
16gb ddr4 3600.

 

Vulkan no longer works after the 0.34 update, I was able to play before the update with no problems and my PC still can run DX11 with the 11_0 code.

 

The maps wont load. It freezes the game in the loading screen. The game launches fine other than the fact that I cant change resoultion which has already been mentioned.
Windows 10
Ryzen 3 pro 4350G driver version: 31.0.12027.9001
Using the igpu
Ram 16gb

 

EDIT: some maps crash with lowest texture quality setting

linux native, vulkan. mod maps, specifically the maps that were ported as one .dae file, immediately crash in the loading screen. no other mods are enabled, temp folder (cache) empty. there are zero foreboding errors, as soon as it starts the "GELua.levelLoading| Level loading" process, there are only warnings such as these:

createTexture| texture invalid filepath '/levels/levelname/filename' corrected to '/levels/levelname/filename.dds'

and it goes on and on, it continues until it abruptly stops in the middle of the sentence, and a crash report window opens. by clicking "close program" nothing happens, i have to xkill beamng, but then that is not enough and i have to stop it through steam

is it a matter of "oh this isnt in the vanilla asset library therefore we have a problem houston"?

EDIT: no, the 0.34.1 patch did NOT fix the problem

//

in other news, these have been recently reported more and more often:

CEF.MainGEUI#local://local/ui/modules/apps/app-container.js:175| Expected AppLayout but didn't get one :-(

GFXVkWindowTarget::{dtor}::<lambda_f1aaef40ecd24327f6dc2ab07a983921>:perator ()| Failed to wait for fences

loadWindowPositionFromFile| Error loading window position from file: Path not found

i said this before and i will say it again: chromium and javascript is such a terrible mixture! you have to work extremely hard to make it work better than lua. and dont get me started on multithreading...

//

out of topic, but this neverending clash between vulkan and CEF (chromium embedded framework) reminds me of garry's mod, that you have to patch in order to make it work. does anyone remember GModCEFCodecFix? there might be some clue in there

 

After the update to fix this problem I can Confirm the update did NOT fix this problem.

 

Anyway to change resolution something other than native? Only get 25fps on 4k and want to run 1080p but doesnt allow me to change, has always been like this since introduction of vulkan all way up til 0.34.1.

Dx11 is fine changing resolutions

 

When using vulkan with traffic turned on, whenever a new traffic car pops in while I'm driving it only spawns around 20-50m in front of me, meaning there is no time to react and avoid it. This happens on all maps, including mod maps, and doesn't happen in the base game. Everything else is loading as usual, it's just the traffic that has extreme pop-in. Is there any settings that might help fix this?