Development Screens (Each post contains a picture OR contributing post)

I love how you've managed to combine what looks like the arse-end of Finn McMissile and the nose of Leland Turbo, and it looks like it works damn well too.
And with those gullwings, just how many classic cars are you trying to crossbreed here?

 

Every one.

 

Sniff

 

no not really
iirc automation was looking to port to asseto but kunos never responded so they contacted beam, its just a way to put your creations ingame and toy around them for a bit, if automation was made for making beam mods it would be much different

 

Hirochi Sunstorm getting new set of wheels (will ditch KLJP wheels), 19x9 (245/35R19) fronts with 19x11 (295/30R19) or 19x13 (325/30R19) rears. Sport, Sport 2R and Race available.

 

nope not that

nerd nerd nerd nerd nerd (you are correct)
--- Post updated ---

those wheels look wayy too big for the design they are, like those etk 5 spokes are MASSIVE

 

Those rims are 19 inches in diameter, which isn't that big. Although the 19 inchers are pushing it they still fit within the wheel arches and fenders for the wide 325 rears.

 

Started working on the Barstow DOHC engine model today, so here's what it looks like after ~6 hours of work :



Still missing a few details on the block and then I'll be able to move on to modelling all the accessories

 

First drivable prototype and my first ever car mod.
More on my discussion thread.

 

Sunstorm engine bits are getting updates, starting with putting catalytic converters! Intake manifolds for V8s will be revised as well. Smaller alternate V8 will be upped to 4.2L and will use recolored Scintilla heads and intake manifold and more!

 

isnt that an Opel Meriva ?

 

It is.
--- Post updated ---
This however, is me experimenting with Array modifier in Blender to create this LED diodes taillights.

 

Adding two extra fuel tanks on the side and putting a new dual radiator setup!

Exhaust piping is done with installing the catalytic converters and muffler pipes (may install exhaust stabilizer mounts), main concern would be the intake piping as well as intercooler piping. Intake manifolds (for V8s) and throttle bodies will now use from Scintilla's parts.

 

Boring stuff with me doing with the Scintilla's base block (white-silver engine head cover) and revised carbon fiber manifold (no cringey gray uneven shades on the top)

 

I am using a Scintilla V8-based model for the Sunstorm 4.2L V8 model. Also using Scintilla chargepipes as well as ETK header model as a basis to work on. Notice the intake manifold is based on the Scintilla's airbox and the throttle bodies have changed too.

Credits to @N0mN0m (from Scintilla small pack) for V8 long block model (also should I put a recolor on the engine head to gray or black)?

 

Also on the Sunstorm V10 (right), it finally looking like a big boy now (Scintilla stock V10 long block is on the left, V10-compatible supercharger is WIP now and most pipes will be reused as well)

 

Tested out the Sunstorm gauges in game, I found out that the d map was a nightmare to work on and shown in game. So I alternated into using the glowmap only for ignition on, which if the ignition is off, the gauge base would be looking similar to how an Ipad screen is off (black).

I swear the sbr gauge stuff especially for the d map is a nightmare to work on, but thankfully the Sunstorm's lore was pretty new at late 2010s to early-mid 2020s so I could circumvent it.

 

I'm not even joking but for me specifically traffic felt more for me in the game but sometimes my computer would crash if I set it up myself and that would be annoying. But if anything I would definetely stick around and wait for either a WIP or even a public release whichever I can get from then. Either way I'm loving this mod so far man, Keep it up

 

Engine stuff is done now, just me a bit too lazy to hide the V8 and V10 and make separate photos for each. Both will share a lot of parts (ex. the TT parts and its piping and intake piping especially, some adjustments will be different depending on situation though).

 

Thanks for the answer, but now i'm also curious for vehicles that are in the pics. For example, the Fiat 500 in your previous post. It's been sold in many countries such as Japan, European countries, and United States/Canada. Will it have not just the EUDM version like in your post but also USDM and JDM ? And also will the respective market cars be able to spawn with your Traffic Spawn mod like if i toggle the USDM spawns, the mod will spawn USDM version and vice versa ? Also thanks again