0.25 Discussion thread

I said GeForce now the streaming service

 

as a vehicle configuration option

 

there is also information that another person has the same thing and he posted this information 2 weeks ago, then there was this update 0.25.3 and safe mode and clearing the cache does not help him

 

You can remove it in the settings, there is a option

 

You're welcome!

 

Can you provide more information on this series?

 

Disabling anitvirus or defender on Cloud Service is impossible. We can only launch game, play it, download mods and have save. We can't access files or change settings.

 

Sometiemes the cars don't brake properly, seems like it mostly happens when braking instantly after full throttle with wheel spin. As you can see in the bottom right, the abs is working and limiting the braking power for no reason. Thats nothing new in 0.25 tho

 

What you should do:
Verify integrity and clear cache. Here are links to these two processes:
https://documentation.beamng.com/support/launcher_support_tools/clear_cache/
https://support.steampowered.com/kb_article.php?ref=2037-QEUH-3335
If this doesn't help:
Go to my documents/beamng and delete the Levels file, if one exists.
Try to run in safe mode. You didn't say you did after I asked you so I assume you didn't try.
If it still doesn't work, uninstall Beam from steam, then delete all of the game's files from the system (careful with this step), then re-install the game.

 

the tracks are misaligned. Why?

And this cuts off abruptly

Train mods or anything alike can't drive when the tracks aren't done properly.
please fix the map design issues.

 

They also can't drive on the tracks because there is no access to them, and neither are they the correct width. But why should they work with mods? It's a vanilla map and the vanilla game does not have trains.

 

Tracks may not be designed to work with train mods but still it looks strange, even from below. Unfortunately WCUSA have a lot of places like this that you don't even need to use freecam to spot them.

 

That's why utah doesn't work I think
--- Post updated ---

I had 1 time like this, the map started, the sound is there and the game is on the loading screen, it helped me to open the machine selection menu using cntr e, but it doesn't seem to work here. and also today , with a strong accident , the sound of the impact was slightly interrupted , it was 2 times .

 

The 88 pessima race configuration is using the high performance radiator instead of the ultra high performance radiator as well as the race configuration will eventually blow up due to over torque caused by the stage 2 turbo and stage 1 performance long block

 

- D-Series is having some texture issues; I know a mod cause this bug, Because I tested in Safe Mode but don't know what mod cause this.
I don't have many D-Series mods as far as I know, But appreciated to know what mod cause this. Thank you


Edit : Every time I want to Download & Install a mod or a mod update, It shows me 'Repo Error' and then the mod corrupts.

 

Is there a way to port the utah map from 0.24 or 0.23 to 0.25? I'm asking because the 0.25 utah map is very laggy on my pc.
--- Post updated ---
Nevermind. I figured it out.

 

in general, my game crashes when I launch Utah, I'm not the only one.I remind you that this happened after the 0.25.3 fix
--- Post updated ---
I'm not going to do anything because of course the fix is guilty, which means it will be fixed soon and there are still people who have this problem, I just want the developers to notice

 

Has anyone encountered such a problem? my g29 steering wheel jerks spontaneously when the car is stationary. I can not solve this problem, I will be grateful for the help

 

does this happen even if the car has just been delivered? if this happens after a stop, it is possible that the feedback settings have too high steering stiffness values.if this is the case, then at a low speed the steering wheel may start to sway to the left to the right, this is on all steering wheels, regardless of the brand, if the steering stiffness settings are less, then at a higher speed the steering wheel will start to rattle. i have
the stiffness settings are 450 and the softness is 150, and the steering wheel starts rotating from left to right at a speed of about 150-160 km/h if you turn in any direction and throw. but I have a thrustmastet t150 pro steering wheel from logitech, the settings may vary. if it twitches when the machine is just installed, the settings will not help. many people have problems with Logitech after 0.25, but since I have thrustmaster, everything works as it was.and yes, due to the high stiffness settings, the wheel does not turn much left-right until the car starts to skid the rear of the car.the stiffness settings are adjusted in the feed backsettings there are 2 parameters stiffness and softness initially there is a small value, but with it the steering wheel will not return to the zero position if it is turned and the car went and with my settings, too, the steering wheel does not return to the end and if you increase the stiffness, then it will come back to the end, but, as I said, the steering wheel will start swinging at low speed. and when I had high settings, then during the swing, if I stopped, it happened (not always)that the steering wheel was swinging slightly to the left to the right.
--- Post updated ---
well, or to put it more simply, if the stiffness settings are very high, lower them, and therefore the softness settings.if it didn't help then I don't know. the point is probably already in the update of 0.25, many after him have problems with feedback at the steering wheels of logitech.