idk what bump-drafting is,, but new rule cutting corners will only be allowed if you afterwards have to slow down more than when you take the normal route also max amount of cut corners: 1 --- Post updated --- nah jk
What about keeping at least 2 wheels inside the white lines at all times, no cuts like it is handled in most motorsports or hotlapping (afaik)? Going off track (except cutting) will most likely cost a lot of time anyway. Btw, initially I tried keeping the ball and car on track 100% but that was way too hard so I figured 95% is enough if it's the slowest time anyway. The plane went off 2 times but I might give it another go, trying to beat Rolands backwards laptime since it's close. Bump drafting:
2 times here, the wentward and the track day golf, that golf is wonderful and sounds menacing i love it.
I had to reply to this i think you can do it you did a 10m 13s with the moonhawk executive using who knows (i bet a steering wheel) I did a 10m 57s with the same moonhawk executive using me keyboard I think you can do at least a 10m 50s with keyboard i will not pay for any damage done to your hand
i used a pad for the Moonhawk and honestly i thnk a pad would be a lot easier to use than a KB imo and you wont pay for any damage to my hand hahaha thats reassuring in that case i definitely will stick to using a pad
Civetta Bolide-Vanilla-Stock Config (Bolide 350 Targa(M)) time -8:59.315- as the screenshot at the beginnig of the video not really fast, but a clean lap was hard enough for me☺
Great car quite prone to oversteer but thats the charm. --- Post updated --- Plus i shaved a little off the Moonhawk Executive time. --- Post updated ---
Seems like im the only one contributing here hmmm (1) WIP Beta released - FSO Polonez aka FPS Trapez | Page 26 | BeamNG
That's why I was 18 seconds faster. I was using a wheel. I'm pretty sure there's a bit more time to taken out from that lap.