Crashhards 8x8 rig is something like that I think?. Off topic: I didn't even download the crashhard 8x8.. my laptop can barely run as is.... Lol
I'm guessing those are MAN KAT1's I've always wanted those in Beam actually, and not sure if they're the same frame. But I'm not sure if they're a lot different too, they seem pretty similar (but then, all frames look sorta similar) Found a few pics, can't really see it though. If anyone could find MAN KAT1 frame pictures, that would be great of them to PM me or send it in this thread by mentioning me --- Post updated --- I'm the lad making the Krone trailers, most likely some others too About Aussie trailers, I could look into them, and I do love my Aussie trucks and trailers with million trailer road trains, would go good with the T-series too maybe even an Australian T-series-derived truck that I may or may not be making --- Post updated --- Also, https://www.beamng.com/threads/deve...contributing-post.1575/page-1267#post-1185638 Planning to make a lot more stuff to it such as a load of chicken lights and a reasonable (at least for texas) amount of chrome with some good "Alcoa's" (lore) and more
If its Aussie trailers, here's some that you could look into that's the most used. BYRNE Livestock B Triple with a Kenworth T908 Prime Mover TIEMAN TANKERS custom built Bulk transport company. One on top is a Volvo FH16 Globetrotter while the one on the bottom is a Kenworth K200 LHD Triaxle drive. My most favorite. FREIGHTER Drop deck in the tail while the Lead and Middle are FREIGHTER Flatbed Triaxles. The Prime Mover is a Western Star(I think) FREIGHTER Dropdeck with what seems to be a Mack Superliner. Sorry for nerding out. I really like trucks and trailers.
Well, you're practically same as me, boy do i love nerding the hell out too I really love the B-doubles and them 8x6's (A question; do any of the rear axles steer on those? they really dont look maneuverable) The most possibility of a one that i might make are the flatbeds or the tankers (i love how the 3 axle dollies look)
Yes the rear axles sometimes even two of the rear axles steer. These trucks have very complex loads so they need those steering to move more easier. Sometimes even two of the front wheels on 8X4*8 has steering aka Taglifts. (Its the lifted wheel, truckers drop those if they need the extra steer or exta wheel for the weight of the load) Here are(sexy), Volvo FMX 460 8X6 with a rear steer. Volvo FH16 with two rear steer. One Front Rear Axle and one Rear Steer. Hope my insight helped.
My only suggestion would be to lower the pitch of the engine sound to be more like as it is heard here: If you are unwilling to do this, would you happen to know how I can make it like this for personal use?
there are a lot of these. you can't expect people not do do something as good as reposting mods other people spent months of work on.
I'm not expecting people to just stop, but this guy didn't even remove the message at spawn, and probably didn't even test it.
There was a thread on the forums, where some guy had a lot of private mods from mooders, and he spilled them on the forums cuz they would leak soon. about a hour later, 65% of these mods were on Modsgaming. (note it was about 20 vehicles) --- Post updated ---
I am using this truck very well!! this truck is amazing P.S I don't know where to say this but I like this game very much
Sorry if this is a stupid question, but what years was this built in? I need to know it for a drawing. --- Post updated --- Never mind
this truck used on movie mad max fury road, it called war rig. with a autocar parts --- Post updated --- aussie trucks
I appreciate your comment. I was able to find them on their website and it turns out the ones I pictured [which are used by the Australian Defence Force] use the MAN TG series frame, the very series that this mod is, which is pretty awesome. Also, those KAT1 series trucks look awesome, at first I thought they were something Russian.
i also like drawing so we both can put our pics here to seei dont know the year it was built but you can use this picture:
Pretty sure they use the TG heavy duty frame, which the TGS and the TGX use, not the smaller ones (18> ton TGM, TGL) I suppose that means the entire KAT1 series uses the same frame, so that's a bit of a jackpot lol
It would be interesting to see an Army truck in BeamNG again. Though its been done before with an M35A1. The German MAN KAT1 would be a welcomed addition.
