Made a BRZ competetor, or that was the intent atleast. Idea was to make a fairly large coupe with a naturally aspirated V6, manual and rear wheel drive. Also had to be affordable. Unfortunately it went all wrong... Firstly, when designing the "simple and fun" 2.5 liter V6, I somehow ended up revving it to 9500 RPM That alone was quite costly, but since i found myself loving this engine and the idea of a 9500 RPM engine being usable as a daily, I kept it. Then I wanted it to be comfortable and prestigious, which made it more expensive and heavy... At this point I realized the body I picked was just too large to make a lightweight agile sportscar. So GT86/BRZ were no longer competitors. Now I was fighting against premium coupes, like BMW M2. And that is just too much for me I did try my best, but the "Markets" tab was NOT impressed... Did get reliabilty up again(77.5), fuel consumption is also decent(9.9 l/100km), cost is a difficult topic actually: Found out there are two different material costs, one is 12 700, the other was just below 30 000; both seem decently affordable to me
2018 CANADIAN MOTORS BOLT GTS A $37,000 Sports Car the world needs. The Bolt GTS is built on a weight-saving aluminium semi-spaceframe chassis, and is powered by a 205 hp 3.0L turbocharged I4 with a top speed of 133 mph (214 km/h) though it is electronically limited to 119 mph (191 km/h). This car is the safest of its class with 10 airbags and comes standard with ESC and ABS. Optional Infotainment System ($3,600 option), sold with standard SatNav.
The 1995-1997 Avanta Majesty. This is the only limousine Avanta created. After having huge successes in their other vehicle line ups, Avanta wanted to make something fun, stylish, and something they've never tried before. They had the body and features planned out, but they needed an engine to pull the big boy around and that's when they created their first V10 engine. The V10 comes with 5 mufflers for both exhausts, making it an extremely quiet vehicle. With plenty of modern safety (for the time being) and a luxurious interior, the Majesty was the limo to have. Avanta ended up selling more than 2,573 units when the limo was still in production. The 2006-2010 Avanta Firenza. This sedan was Avanta's push for a car that had a small but powerful engine. The Firenza's body was inspired by the Volkswagen Jetta. Before the release of the vehicle, the owner of Avanta approached the owner of VW and asked if they could release the body style. Instead of saying yes, the owner of VW decided both companies would team up to make one vehicle. The body of the Firenza was kept the same, but everything else was completely remade. After working together, Avanta stuck a turbo charged I4 into the engine bay. The 1989-1997 Avanta Sparrow. The Sparrow was made to compete with Geo Tracker. Plain and simple. The sparrow came with a 5-Speed manual V6 with 4X4. The sparrow was made for street and light off roading.
I worked on this car the last few hours and It's based on the Lamborghini Diablo SV The thing that took the longest probably was tweaking the engine to be almost the same as the Diablo SVs So here I present you the: 1998 Civetta Demonio SV Top Speed:333 Km/h Power: 530 hp 0-100: 3.8 seconds
For my first 2 days in automation, I don't think I did bad. 2005-2015 Eclipse Calibre (first car) 2010-2017 Eclipse Mark One 2006-Production has not ended Eclipse Byte (cheapest car) 2010-Production has not ended Eclipse Lux
first a brief bibliography: EFI stands for Eh, F**k It. It was an american tuner, known for tuning cars and making stupidly unaffordable cars to fund production of a car for the masses. And this is their first one back in 2010, when he decide to slap a v12 in a Ferrari 458 body. The result was the EFI V12. It camed with one trim and one engine, which he named it "Imperfection". 0-62 is 2.5 seconds while boasting speeds of around 250 mph thanks to the twin turbos setup. Now making this as beamng quality is hard af, but you should see it pop up in the repository soon, as soon as someone knows how to do 3d jbeam editing (cuz a bunch of text is not for me). (P.S. the company is loosely inspired on Hennessey, with the business plans from Tesla) 2nd production car is a truck
wow so many good designs i wonder if someone could make a 2nd gen GMC C/K series (1967-1972) --- Post updated --- btw here is mine for reference
Here's some (all 5 WIP), more soon. 1993-1997 Gavril SR5 Affordable aerodynamic European coupe. 2017-2020 WM Panther Modern V8 powered Aussie sedan. 1993-1997 Gavril Hobby Small pickup/van thing. 2015-2019 WM Sergal Edgy V8 muscle car. 2003-2008 Acadia Trail Top-heavy, peppy, compact yet turbocharged 4x4. Automation isn't my strongest suit atm.
