0.28 Discussion Thread

I think its kinda strange that the Diesel configs of the new ETK remaster have the same gauge cluster as the petrol variants, despite the Diesel ones having a redline of 5000 rpm, and the petrol engines a redline of 7000 rpm.

 

This Freeroam button shouldn't be stretched down? 1920x1080 resolution

 

your lucky
the steering wheel or the needles on the speedos dont show
and this is on a fresh pc 1st install

 

The LeGran interior is all black

 

The engine app is supposed to be like that or is that a bug?

 

Similar to the post above, I also want to report that there is other vehicles that has this interior (engine bay, the chrome lining on the Miramar and the Wendover) has a texture issue. Keep in mind I did deep cleaned the cache as well as running it on safe mode but to avail that I can attempt to fix any of these. By the way, it somehow only occurs with Lowest lighting quality selected. As my PC is a literal garbage, it will not run well with Low selected.

 

The LeGran has this as well

 

I have not checked on the V6 models, however the 4 cylinder ones seems to be fine.

 

Nos only decreases and indicates being used with the "Toogle Nitrous Oxide Injection", if we use the "Activate Nitrous Oxide Injection" the widget don't changes, Nos is activated and it dont decrease. INFINITE NOS BOYS

 

The new clutch system is weird, i used to just tap the clutch button with shift up or down on controller and it would shift, now i just get crunch and damage to the gearbox. Also when fast shifting on pedals with shifter it just sometimes doesn't want to shift

 

i have the same issue, i have slowed down my shifting significantly and it still crunches the gearbox, but mostly at downshifts

 

Doors and handles, are just working when we switched to a car, so then we aren't able to open/close doors in walking mode; I have a video for it (Turn volume up) : Fixed, cheked in Safe Mode

 

Bugs:
These moss decals are flickering while moving camera.

Hole in the water.

Collision don't match with the building model (this building is under the dam close to the tunnel).

Misaligned doors on the hangars near to the hangar from screenshot before.

Wires have very low draw distance (tested only on these graphic options).


Small details:
These pipes/wires in the tunnels should be placed on the other side and higher up.

Missing entry/exit holes for pipes?


Missed opportunities:
Big collision box on these stairs. It would be nice to be able drive on them.

Inside there is no collisions. It would be nice to have this building open and drivable.

 

the problem is that let's say I change gear and immediately throw the clutch before everything would have turned on normally and now if I immediately throw the clutch after switching, then a crunch will be heard and now I need the gear to turn on straight then everything is fine

 

You guys are the best! Cheers!

 

the problem is that I switch gears and at the moment of switching, N is first set and if at this moment you release the clutch, you will hear a crunch now you have to wait for the transmission to stick in. at 0.27 everything was fine.but on the other hand , realism when switching gears , N is first put on and then only the transmission is turned on and if N is put on at the time of switching and you release the clutch , then in fact when the transmission is switched on , then there should be a crunch since the clutch has already been released .But it 's still annoying .it is better to return as it was in 0.27