0.26 Discussion Thread

Yeah thats normal when updates change textures or how they working ingame had that on East Coast too with distant trees

 

and Utah

 

Beam debug modes for deformGroups and breakGroups are inverted in the UI.

Basically says the current view is for breakGroups when in reality it's showing deformGroups. Other way around is also true

 

deleted

 

it seems that most old car mods cant be used under arcade mode anymore, they never shift up unless you use manual mode, it seems similar to the tire issue a lot of mods had in 0.24, im not sure if this is intentional or not but its a bit annoying.
ill attach a video to show what i mean, ive tested this on multiple old car mods and got the same result.

 

AMD RX580, this has been already reported a few times but there is weird black blinking squares on lights at certain angles

 

Is anyone still having issues with adjusting the 200bx race rear coilovers after the hotfix? I've tried running the game in safe mode, I have also tried deleting coupe.zip from the game files and verifying to re-download them, to no avail.

Edit: If anyone is still having issues with their 200bx suspension, I may have found a potential solution. I was able to fix my issue by deleting a copy of coupe.zip that I hadn't realized I left in the vehicles folder. Oops.

 

Yes, this happened when I was running safe mode. A lot of the terrain in WCUSA is black.
Anyone else having the same issue?

 

so far, the doors do not open only for the version with the roof everything is fine civet scintilla spider doshihpor the doors do not open only for the version with the roof everything is fine
--- Post updated ---
no I don't have one it looks like the pbr texture has stretched
--- Post updated ---

no I don't have one it looks like the pbr texture has stretched

 

When the devs be lazy. What is this quality even? -_-

 

motion blur issue

 

"someone vandalized my prized Pessima GTz with pink acrylic paint."

 

Someone still getting performance issues with traffic that didn´t happen before 0.26?

 

Sorry if this has already been posted, I couldn't find anything as I quickly scanned through the known issues list.

The drag transmission on the 200BX won't allow me to use the trans brake. I've tried in safe mode as well, no luck. It works with other vehicles both in safe mode and my current version.

 

Grass clipping through porch on the A-frame house in WCUSA

 

(0.26.2, no mods)

The Barstow 353 and 423 base versions both use four-barrel carbs - not sure if this is a bug, but the RoadSport versions of those vehicles say that "four-barrel carburetors" are meant to be an upgrade, and the 291 base version doesn't have four-barrel carbs.

 

This is from the latest version in safe mode. After loading a saved beamstate seems like the new Covet is missing beams needed to properly animate panels:

• Everything seems to unlatch immediately after loading
• Hood release won't work even though the hood looks released
  
• Hood doesn't open
• Doors swing open loosely and wont close when clicked
• Trunk won't close after opening but seems to hold at the top properly

This feature works fine with most older vehicle models, even the Bus loads fine. The pickup also works despite having the animated bed. I'm guessing this is a problem for vehicles that have body panels using the "Advanced Couplers" shown in one of the latest update videos. I tried it with the Scintilla and first time I think the whole car exploded (not sure as it happened very fast) and the game crashed, I tried it again a couple times and the game would pause, after unpausing some random broken part sounds are heard and the car is disabled with the speed gauge showing a dash, like the lua instance for that car just crashed.

Edit: had time to make a quick video showing the problem, the scintilla got the game to crash by closing the door

 

(0.26.2, no mods)

So, the Bluebuck has the 2-speed Dual-Matic transmission from the Burnside in its transmission selector, but as far as I know, it's not used on any Bluebuck configurations. It's not used on the 232 straight-six automatic versions, or the 291 base auto versions. So, if it's not used on those configurations (for which it would work wonderfully), why is it in the transmission selector?

 

When using the Path Camera tool, the yellow camera preview used to show exactly where it is on the path when linked with a replay's timeline (and viewed externally) is not shown when running the replay. When clicking on a marker, it does preview the camera's orientation from the previous and next marker, but does not show the exact preview of the camera during playback. This becomes difficult to determine the camera's placement during playback, and slows down the editing process. Should also mention that the "Render Options" button in the Path Camera window does nothing.

 

Weird shading happens when in parts selector. Yes I've tried this in safe mode.