I think that there will be not much change in Covet suspension, and I dont think that it will be 100% finished before update, because it is mod on which I'm learning, so I it will be never finished) --- Post updated --- Maybe I'm doing something wrong?) 520kph 422hp 640kg YES its FWD --- Post updated --- Problem is in triangles, 100% --- Post updated --- AWD 300hp 2.95s 0-100 Good --- Post updated --- RWD, Maxed engine (422hp), 4-Speed AT 2.00s Very good
This is some really nice progress. For a suggestion, I thought about a mid mount Rally i4. A little like a Metro 6R4, just lighter and ofc tubular. You could even add a body around it, although that would be a lot of work.
View attachment 895533 Maybe I'm doing something wrong&) Yes, adding a plastic rally body will be hard. I'll need new chassis, new model, new jbeam, etc. And dont forget about Covet remaster, so I think that plastic body over chassis need to wait) --- Post updated --- Finally fixed AWD system, just added Sunburst's one) (sorry, no flexbodies for now) Tuned engine a bit, so now 1.8L boi can reach 558hp, but with 2.0L bore it has 683hp and 10k rpm redline (if you drive long enough at 683 hp, engine can explode)
Known issues: 1.Chassis not strong enough for drag racing 2.Chassis starting wiggling if u drift on AWD with race tires at over 170kph --- Post updated --- 3. Stage 3 Turbo "interc" node has only 2 conections. 4. Engine mounts are too weak to handle over 600hp --- Post updated --- Working splitter --- Post updated --- GTRX wing)
Pikes Peak setup) --- Post updated --- Now returning to Jbeam and modeling. Todo: 1. Fix 3d Model (visual bugs). 2. Fix rear suspension (no flexbodies). 3. Make textures. 4. Beta test on Patreon. 5. Add Drag chassis and do Jbeam for it (or do chassis for V8 engines in mid and make Jbeam which will handle drag racing). 6. Fix all bugs. 7. Add new wing. 8. Finally make dash. 9. Make configs. 10. Release on Repo.
in the future, will you make a body shell just as a modification? (like nascars have a frame with engine and stuff, then a body shell, which kind of feels like plastic)
As I said, this mod will recieve many updates, so I think after remake of Covet I'll put new suspension there and do plastic bodyshell (maybe 2-3 variants of it)
1.38 around WCUSA track with unfinished mod (ON KEYBOARD, on wheel 100% it will be much faster) Specs: 412hp 640kg 17x8 race tires AWD Potential of this car when it will be finished is near 1.25-1.30 (or less) using a wheel. P.S. Same results I got 2 month ago on wheel using 700hp Sunburst, 900hp AWD Pessima (Midsize), my Bolide TrackDevil but RWD and 700hp
Sorry for the huge delay. I tried to fix the 3d model, but it didn't work. Now Im reading tutorials in MFD Discord) P.S. I also came up with a good idea for engines and their tuning. P.P.S. Also, there should be a beta test for Patreon subscribers soon. --- Post updated --- Now I will describe the idea itself. Instead of using 1-4 slots for engine tuning, there will be only 1 in which you can select the tuning stage. For example, for NA engines in the first stage, it will be possible to change the stock intake to a cold air intake, install a sport exhaust, slightly increase the engine RPM and reconfigure the fuel map. This would allow a 2.4L I6 with 160 hp to get 180 hp without adding a turbo. For turbocharged engines, the first stage will be a sport exhaust, custom fuel map, increased rpm and increased pressure in the stock turbines. This would allow a 200 hp 2.0L I4 to get 235 hp. --- Post updated --- Stage 2 for NA engines will be adding turbo, performance fuel injectors, forged pistons (new from the store for some engines), intercooler, tuned ECU with custom ignition timing, RPM, fuel map, etc. I can write a lot more about this, but I think you get the idea
I'm currently working on custom sounds of real cars. Started with Audi R8 sound for my Bolide mod (which I updated yesterday). Sounds bad( So I'm currently learning/training how to make custom sounds to make couple of real life engines for CRC P.S. I'm still alive, sorry for huge delay in posts)
Now im waiting for covet remaster or will do it using new pessima parts cos current covet parts arent good for "supercar"